პროდუქცია

მთავარი
პროდუქცია
სიახლეების გამოწერა



GV-VS14

 

  • H.264, MJPEG
  • 4-Channel full D1 real-time video / audio
  • 12V DC
  • Tampering Alarm
  • USB storage recording
  • Support GPS, GV-GIS
  • Support UMTS / 3G / 3.5G / 4G
  • Support Wiegand reader
  • Support over 50 PTZ models
  • Support 29 languages on web interface

GV-VS14 is a powerful H.264 Video Server with compact size and supports multiple applications. It supports 4-channel full D1 real-time video and audio encoding, fully integrated with GV-NVR to form the most powerful IP solution. It also supports over 50 PTZ models to fulfill various project demands. It can record video to a local USB storage, forming the smallest video recorder. With GPS and UMTS/ 3G/ 3.5G/ 4G support, it provides GIS solution integrated with GV-GIS. It can also active Tampering Alarm alerts when a tampering event happens to prevent crime events.


SPECIFICATIONS

Video
Video Standard NTSC, PAL
Video Input 4 channels
Compression H.264, MJPEG
Frame Rate NTSC 30 fps per channel; 120 fps in total for 4 channels
PAL 25 fps per channel; 100 fps in total for 4 channels
Video Resolution NTSC Main Stream 704 x 480, 704 x 480 de-interlace, 352 x 240
Sub Stream 352 x 240, 176 x 112
PAL Main Stream 704 x 576, 704 x 576 de-interlace, 352 x 288
Sub Stream 352 x 288, 176 x 144
Video Streaming Configurable frame rate and bandwidth,
Constant and variable bitrate
Video Adjustment Brightness, Contrast, Hue, Saturation
Dual Streams Yes
Audio
Audio Input 4 channels
Compression G.711
Audio Support Two-way
Management
Event Management Trigger Schedule, Sensor Input, Motion Detection
Action
  • Store Video (AVI format),
  • Send e-mails with captured images,
  • Upload captured images to FTP Server,
  • Monitor through Center V2, VSM and GV-GIS,
  • Activate relay outputs to control external devices
Firmware Upgrade Remote upgrade by HTTP,
Firmware upgrade utility included in the Software DVD
Storage USB storage device (optional)
Client PC Requirements Microsoft IE 7.x or above running on Windows XP / 7 / Server 2008
Security IP address filtering
Network
Interface 10/100 Base-T Ethernet,
802.11b/g/n Wireless LAN (optional),
Mobile broadband: UMTS, EDGE, etc. (optional)
External Interface
Video Input 4 BNC ports
Audio Input 2 stereo phone jacks to 4 RCA ports
Audio Output 1 RCA port
Sensor Input 4 inputs
Alarm Output 4 outputs
PTZ RS-485 +/-
GPS UART
Ethernet RJ-45, 10/100 Mbps
USB 2 ports (USB 2.0)
Power Input 12V, 3.5A
Output 12V, 1.35A, (19.2W Max.)
Environment
Operation Temp. -20 °C ~ 55 °C / -4 °F ~ 131 °F
Humidity 0 ~ 85% RH (non-condensing)
Physical
Dimensions (L x W x H) 174 x 145 x 40 mm / 6.85 x 5.7 x 1.57 in
Weight 0.73 kg / 1.61 lb
Applications

Note:

  1. The GV‐Video Server cannot work with the microphones that acquire power from the unit. Use microphones that have external power supply.
  2. Currently, 3 TB hard disk is not supported.
  3. It is not recommended to use the flash USB drive with GV-VS04H and GV-VS14 because of its slow read and write speed.
  4. Product design and specifications are subject to change without notice.

OptionsOptional devices can expand your GV-Video Server's capabilities and versatility. Contact your dealer for more information.

GV-GPS Receiver The GV-GPS Receiver is a Global Position System receiver. With the GV-GPS Receiver, you can perform GPS tracking and location verification of the GV-Video Server. Two types of interfaces are available: UART (for GV-VS04H / GV-VS14) and RS-232 (for GV-VS12).
GV-Relay V2 Working with the GV-Relay V2, the GV-Video Server is capable of driving the loads of relay outputs over 5 volts.
GV-WiFi USB Adaptor The WiFi USB Adaptor is designed to connect the GV IP devices, such as GV-Video Server or GV-Compact DVR, to the wireless network.
GV-VR605A DC Voltage Regulator The GV-VR605A is a voltage regulator designed to be installed in the car and supply power to GV-Video Server and its connected cameras. The GV-VR605A is capable of maintaining a 12V voltage to the GV-Video Server and its connected cameras, providing protection against voltage spikes when you turn on the car ignition.
The following devices are only supported by GV-VS04H and GV-VS14.
Access Control Series
The GV-Video Server can work with the Wiegand-interface card reader to send cardholder data to the central monitoring stations Center V2 and VSM, as well as GV-System.
GV-Reader GV-Reader includes transmit-receive antenna and electronics. Featured with the Wiegand output, the unit is compatible with any standard access control panel.
GV-R1352 Card Reader The GV-R1352 is a card reader designed to recognize identification cards. Featured with the Wiegand output, the unit can be connected to any standard access control panel. The GV-R1352 comes with a weather sealed and IP66 compliant housing for outdoor use.

Supported Wireless LAN USB Adaptor

Vendors Model
D-Link DWA-140 (H/W version B1), DWL-G122 (version C1)
EDIMAX EW-7318Ug, EW-7718Un, EW-7711UAn
Linksys WUSB54GC, WUSB600 (version 1)
Pegatron WL-166N11
Note: Linksys WUSB54GC ver. 3 is not supported.

Supported Mobile Broadband Device

Vendors Model
Bandluxe C320, C501
HUAWEI E156, E156B, E169, E220, E303, E353, E1692, E1750, E1752, E1756, EC169C, EC189 USB Modem (HSDPA/UMTS/EDGE/GPRS/GSM)
Novatel MC950D, MC996D, MC998D (HSDPA/UMTS/EDGE/GPRS/GSM)
Onda MSA523HS
Sierra 250U
Verizon USB727, USB728, USB760 Modem (EVDO)
Vodafone K3565 (Rev 2)
ZTE MF100

Google+