Public Address Two Channel Power Amplifier FY-270B/FY-2130B/FY-2180B/FY-2260/FY-2300B/FY-2360BFY-2500B
Public Address Two Channel Power Amplifier FY-270B/FY-2130B/FY-2180B/FY-2260/FY-2300B/FY-2360BFY-2500B
Product description
Installed in the weak current room or sub-control room of each broadcast management area, built-in high-fidelity power amplifier, used for program playback and local broadcast in halls, corridors, outdoors and other areas, suitable for broadcast sound reinforcement in a large area;
◆ Standard 19-inch rack-mount design, black aluminum oxide brushed panel, laser-cut process chassis, professional and high-grade appearance;
◆ In order to save installation space and better heat dissipation design, the device has built-in two independent power amplifier modules, independent input and output, and each channel can adjust the volume independently;
★ 2-channel 6.35 input, support large two-core unbalanced input and large three-core balanced input;
◆ Support 1 channel selectable voltage (70V/100V) or fixed resistance 4-16Ω output, so that the machine can be used not only as a broadcasting system, but also as a professional speaker;
◆ 3-segment LED level indication: It can display the output signal strength, distortion state, protection, and it is convenient to observe the working condition of the machine;
★ Adopt the most advanced transformer design in the industry, when the internal temperature of the transformer exceeds 105 degrees, the output of the power amplifier will be cut off, so as to better protect against overload;
★Comprehensive protection circuit: DC protection, if there is a DC voltage at the output of the power amplifier, the output will be cut off immediately to protect the speaker; short-circuit protection: the output will be cut off immediately when the load is short-circuited, and the fault will be automatically restored; thermal protection, the temperature inside the power amplifier exceeds 70 ℃, and the power will be turned on Control; over 85 ℃, power amplifier off;
★ Independent soft-start protection circuit to avoid damage to equipment caused by high current at the moment of startup;
★Professional pressure limiting circuit can detect output signal clipping caused by power supply voltage drop, heavy load, input signal too large, power amplifier temperature rise, etc., and automatically correct it to avoid output signal distortion, resulting in broken sound and damage Amplifiers and speakers;
★ Tunnel-type air slot, forced air cooling from front to back, with intelligent management of fan speed, low speed operation at room temperature, fan speeds up when the temperature inside the power amplifier exceeds 70°C, power control is activated, and the fan turns at full speed and cuts off the power amplifier when it reaches 90 degrees Output, light up the temperature indicator for abnormal alarm;
◆Professional modular circuit design ensures reliable consistency of products.
◆ High-strength 1.5MM thickened fuselage to ensure that the product will not be deformed due to the harsh transportation environment;
Technical Parameters:
◆ Rated output power: 2X70W/2X130W/2X180W/2X260W/2X300W/2X360W/2X500W
◆ Speaker output: 70V, 100V & 4~16Ω;
◆ Input sensitivity & input impedance: 775mV/10KΩ, unbalanced 6.35 interface;
◆ Frequency response: 50Hz~16KHz(+1dB, -3dB);
◆ Signal-to-noise ratio: >90dB;
◆ Total Harmonic Distortion: 0.5% at 1KHz, 1/3 output power;
◆ Working temperature: 5℃~40℃;
◆ Working humidity: 20% to 80% relative humidity, no condensation;
◆ Protection: AC FUSE*T4A*1;
◆ Power cord: (3*0.75mm)*1.5M (standard);
◆ Power interface: Three-position phoenix tail plug interface;
◆ Input power: AC220V/50Hz-60Hz;
◆ Installation form: rack installation;
◆ Dimensions: 482 (width) * 380 (depth) * 88 (height) mm excluding machine feet;
◆ Weight: 9kg;
- City courier delivery
- Bank transfer
- Returns within 14 days after receiving the order