Skip to content
SESAME

SESAME SB-500I electric bolt lock

Model
9400

Electric bolt lock for frameless glass, wooden and metal doors: stainless steel bolt, bolt position light and CE marking.

On order

Price on request

Send a request. A manager will name the price and the delivery time during working hours.

Key specifications

Power supply
DC12 V±10%
All specifications

Description

The SESAME SB-500I is an electric bolt lock for frameless glass doors, as well as wooden, metal and fire doors. Hard, corrosion-resistant aluminium alloy body; CE marked.

  • Stainless steel bolt, 12.6 mm in diameter with a 17 mm throw.
  • Status light: red with the bolt withdrawn, green with the bolt thrown, so the door state shows at a glance.
  • Locking delay of 0, 3, 6 or 9 s.
  • 12 V DC ±10 % power; start-up current 960 mA, standby 130 mA.
  • Photoelectric control and low body heat.
  • Lock plate 192 × 25 × 37 mm, strike plate 100 × 25 × 3 mm.

The power supply is sized for the 960 mA start-up current during access control installation.

Specifications

General
CertificationsCE
Access control
Lock delay0/3/6/9second
Hardware
IndicatorsRED when the bolt being withdraw, GREEN when the bolt being projected
Power
Power supplyDC12 V±10%
Current drawStart Current is 960 mA, Standby current:130 mA
Physical and environment
Lock panel size192L × 25 W × 37H (mm)
WiringConnect RED and ORANGE together
Strike plate size100L × 25 W × 3H (mm)
Bolt sizeStainless steel,12.6mmDIA,17 mm throw

FAQ

Why is door closer needed in Access Control System?

Door closer is essential in Access Control System for several reasons: 1) correct electric lock operation – lock closes only if door is fully closed, closer ensures this, 2) security – door always closes and locks, doesn't stay open, 3) energy efficiency – closed door maintains temperature, 4) comfort – requires no manual closing. Without closer, electric lock won't work correctly.

How to choose correct closer for door weight?

Closers are classified by EN 1154 standard by force (EN 1-7): EN 1-2 – 20-40kg (light doors, internal offices), EN 3-4 – 40-80kg (standard doors, most common), EN 5-6 – 80-120kg (heavy doors, entrances), EN 7 – 120-200kg (very heavy doors, fire-rated). Measure door weight and select corresponding EN class. Wrong choice leads to rapid wear or insufficient force.

Can door closer integrate with fire alarm?

Yes, electromagnetic Hold-Open closers integrate with fire alarm – door is fixed in open position by electromagnet, and when fire alarm activates, electromagnet releases and door automatically closes (fire-rated doors, evacuation routes). This is mandatory for EN 1154 and fire safety standards compliance. Integration with access control (remote release) is also possible.

Need it installed?

LAGI will deliver, install and set up the equipment and provide warranty service afterwards.