
Security system design
Low-voltage systems design for a new building, a renovation or a large site: device layouts, cable routes, an equipment specification and an estimate.
What's included
Site survey
We study the plans, inspect the building, and clarify the requirements and existing systems.
Layout plans
We position cameras, readers, detectors and loudspeakers, and show the camera fields of view.
Cable routes
We draw the routes on the plan and choose locations for cabinets and conduits.
Specification and estimate
We list equipment models and quantities, and calculate the cost of equipment and labour.
Links between systems
We work out how the fire alarm, access control and public address operate together.
Installation to the design
We install and set up the systems, and update the design if anything changes on site.
Security system design in Tbilisi is needed when a site is large, there are several systems, or different contractors are doing the work. A design answers in advance the questions that would otherwise be settled on the go, at a high cost: where each camera and detector goes, where the cable runs, where the equipment cabinet stands and how much it all costs. LAGI has worked with low-voltage systems since 1989, designing them and then installing them to its own designs. An engineer visits your site in Tbilisi free of charge and studies the plans.
What the design includes
- Floor plans showing the positions of cameras, readers, detectors, loudspeakers and door stations.
- Camera fields of view: what each camera covers and at what level of detail.
- Cable routes, locations for cabinets and racks, and a cable schedule.
- Power and backup calculations: power supplies, batteries, uninterruptible power supplies.
- Calculation of the CCTV archive and the network load.
- An equipment specification with models and quantities, and an estimate for equipment and labour.
Low-voltage systems before the finishing work
Low-voltage systems are everything that runs on low voltage and carries signals: CCTV, access control, burglar and fire alarms, intercoms, public address and the computer network. Cable for them is cheapest to lay before the finishing work, while ceilings and walls are still open. A design at the construction or major renovation stage allows cable routes and conduits to be built in straight away, together with the electrical wiring, so that finished walls do not have to be chased later. If you plan to add a system later, we leave spare capacity for it in the design: a cable or an empty conduit.
One scheme for all systems
A single design brings together CCTV, access control, fire and burglar alarms, intercoms and public address. Shared cable routes and cabinets save space and labour. The links between the systems are worked out at the same time: on a fire alarm signal, access-controlled doors on escape routes are released and a voice message is played over the PA system.
What we need to get started
Floor plans of the building in PDF or DWG, the use of each room and your requirements: what needs protecting, who should be allowed where, and where sound is needed. If there are no plans, the engineer takes measurements on site. For an existing building, we look at which systems and cables are already in place and what can be reused.
Who it is for
Designs are commissioned by developers and architects, managers of business centres and warehouses, schools and hotels, and owners of large private houses. Examples of systems for different sites are collected in our sections for business, for institutions and for industry.
Design and installation
Once the design is ready, LAGI handles installation and commissioning: equipment is sourced from the specification, cable is laid and the systems are set up. If the layout changes during the work, we update the design so that the documentation matches what has been installed. LAGI gives a warranty on the equipment and the installation work; the conditions are on our warranty page. You can request a design through our quote form.
How it goes
- 01
Free site survey in Tbilisi
We study the site and plans, and discuss your requirements and the set of systems.
- 02
Design brief
We record which systems are needed, where, and to what requirements.
- 03
Design
We prepare the plans, routes, specification and estimate, and agree them with you.
- 04
Installation and commissioning
We install the systems to the design and set them up to work together.
Questions & answers
Why do I need a design if cameras can be installed straight away?
For an apartment or a small shop, a design is usually not needed: the engineer settles everything during the site visit. A design is needed when there are several systems, the site is large or construction is under way. Without one, cable is laid as the work goes, finished walls are chased later, and extra equipment is bought when shortfalls come to light.
What are low-voltage systems?
They are systems that run on low voltage and carry signals rather than powering heavy equipment. They include CCTV, access control, burglar and fire alarms, intercoms, public address and the computer network. They share cable routes and cabinets, so it makes sense to design them together.
At what stage of construction should the design be ordered?
Before the finishing work, ideally together with the electrical design. Cable routes and conduits can then be laid while walls and ceilings are open, and positions for cameras, readers and cabinets can be agreed with the interior design. If the finishing is already done, a design is still useful: it helps to route the cable with the least rework.
What do you need to start the design?
Floor plans in PDF or DWG and a description of the requirements: what needs protecting, who should be allowed where, and where sound and alerts are needed. If there are no plans, the engineer takes measurements on site. For an existing building we also look at which systems and cables are already in place, so that they can be used in the new design.
How much does a security system design cost?
The price depends on the site area, the number of systems and how detailed the documentation is. A CCTV design for one floor costs much less than one covering all low-voltage systems of a business centre. We quote after studying the plans and requirements. A large site can be designed in stages, starting with the most urgent systems. The site survey in Tbilisi is free.
Does the design include an estimate?
Yes, the estimate is part of the design. The specification lists equipment models and quantities, and the estimate gives the cost of equipment and labour. This makes it easy to compare offers and plan the budget. If the layout or the set of systems changes, we recalculate the estimate along with the design.
Other services
Not sure what you need?
Book a free site survey in Tbilisi: an engineer walks the property with you and suggests a setup.