Skip to content
3D render: a stepladder and an open toolbox below a security camera on a facade

Security system maintenance and repair

Scheduled checks and repair of CCTV, alarms, access control and intercoms: disks, power, cameras, locks, detectors and upgrades for older systems.

What's included

  • Scheduled checks

    We check recording, the archive, detectors, locks and power against a checklist for each system.

  • Camera cleaning and adjustment

    We clean lenses, correct the field of view and focus, and check the IR illumination.

  • Disks and power

    We check the condition of hard disks and replace worn disks, batteries and power supplies.

  • Diagnostics and repair

    We find the cause of the fault on site and repair or replace the unit.

  • Upgrades

    We add cameras, replace recorders, move analogue cameras to HD and set up viewing from your phone.

  • Report after each visit

    We record what was done and what should be replaced before the next check.

Security system maintenance and repair in Tbilisi matters for any system, even one that appears to be working. Dust and cobwebs build up on cameras, the hard disk in the recorder wears out, and backup batteries in alarms and access control lose capacity. Usually this comes to light on the day a recording is needed and turns out to be missing. LAGI has worked in security systems since 1989, and a scheduled check is the cheapest way to find such problems early. The engineer's site visit in Tbilisi is free.

What we check during scheduled maintenance

CCTV. The image and focus of every camera by day and by night, the IR illumination, and the mountings after wind and rain. We clean lenses and protective glass. On the recorder we check the condition of the disks, the actual archive depth, the time and date, update the firmware and passwords, and check viewing from your phone.

Burglar and fire alarms. That every detector and siren triggers, the control panel's backup battery, the batteries in wireless detectors, and alarm delivery to your phone via GSM or the app. Smoke detectors are cleaned of dust.

Access control and intercoms. The locks, readers and exit buttons, the emergency release button, how the doors behave when the power is off, and sound and video on the monitors.

After the check you receive a list of the work done and recommendations: what to replace now and what can wait until the next visit.

How often to service

For indoor CCTV, one or two checks a year are usually enough. Outdoor cameras by a road, on a building site or at a warehouse get dusty faster and are checked more often. Fire alarms are checked regularly: a smoke detector with dust inside can trigger falsely or fail to trigger at all. We set the schedule to suit your site.

Repair and replacement

If a camera has stopped showing a picture, the disk is not detected by the recorder, or the door does not open from the intercom, the engineer finds the cause on site. Common causes are a power supply, a connector, a damaged cable or a worn disk. The faulty unit is repaired or replaced. We choose replacements from our catalog so that they are compatible with the rest of the system: power supplies, cameras, video recorders, locks and readers.

Upgrading an older system

An old system does not always need replacing entirely. Analogue cameras can be swapped for HD analogue ones while keeping the coaxial cable, and the picture becomes noticeably sharper. With an H.265 recorder, the same disks hold more days of recording. Cameras, viewing from your phone, alarm detectors or access control on doors can be added to the system. Whether an upgrade or a new system makes more sense, we work out after the survey.

Systems we service

We maintain and repair CCTV, burglar and fire alarms, access control, time and attendance, intercoms and PA systems. If the system was not installed by us, we first inspect it and tell you what can be repaired.

What affects the price

  • The number of cameras, detectors, doors and other devices on site.
  • How many systems we check in one visit.
  • For repairs, the cause of the fault and the cost of replacement parts.

The site visit in Tbilisi is free. Describe the problem in a request or give us a call, and we will arrange a time.

How it goes

  1. 01

    Request

    You describe the system or the fault, and we agree on a time for the visit.

  2. 02

    Free site visit in Tbilisi

    An engineer inspects the system and carries out diagnostics on site.

  3. 03

    Repair or check

    We replace faulty units, and clean and adjust the equipment.

  4. 04

    Report and recommendations

    We show you the results and agree on the next scheduled check.

Questions & answers

How often does CCTV need maintenance?

For indoor cameras, one or two checks a year are usually enough. Outdoor cameras by a road, on a building site or in a dusty workshop are checked more often, because their lenses get dirty faster. At each check we look at the image, clean the cameras, and check the recorder disks and the actual archive depth.

Why has a camera stopped showing a picture?

Most often the cause is power: a failed power supply or a PoE port on the switch. Less often a connector has oxidised, the cable is damaged or the camera itself has failed. If all cameras go dark at once, the problem is usually in the recorder or the shared power supply. The engineer checks the chain step by step and replaces the faulty unit.

The recorder shows a disk error. What should I do?

Save the recordings you need while the disk can still be read, then replace the disk. Video is written to the recorder's hard disk around the clock, and over time the disk wears out. For CCTV it is best to use disks designed for continuous recording. After the replacement we check that the archive is kept for the required period.

Can an old system be upgraded without replacing everything?

Often, yes. Analogue cameras are swapped for HD analogue ones, and the old coaxial cable stays. The old recorder is replaced with a new one using the H.265 codec, so the same disks hold more days. Cameras and viewing from your phone can be added. We decide which option makes more sense after inspecting the wiring and equipment.

What if the door does not open from the intercom?

Check whether the lock clicks when you press the release button. If there is no click, the cause is usually the power supply, the button or the wire to the lock. If there is a click but the door does not open, the lock may have shifted or jammed. Either way, the engineer finds the cause on site and repairs or replaces the lock.

How much does security system maintenance cost?

The price of a scheduled check depends on the number of devices and systems on site: checking four cameras costs less than checking the CCTV, alarm and access control in an office. We give the cost of a repair after diagnostics, once the cause and the parts needed are clear. The engineer's site visit in Tbilisi is free.

Other services

Not sure what you need?

Book a free site survey in Tbilisi: an engineer walks the property with you and suggests a setup.