Skip to content
3D render: face recognition terminal next to turnstiles at a staff entrance

Time and attendance systems

Face, fingerprint, palm or card terminals and software for timesheets and reports, installed at a single entrance or across several branches.

What's included

  • Choosing the terminal

    We take into account the number of employees, the conditions at the entrance and the clock-in method: face, fingerprint, palm or card.

  • Installation and connection

    We mount the terminal at a convenient height, run power and network cabling, and connect a lock if needed.

  • Staff enrolment

    We enrol employees on the terminal: we capture faces or fingerprints, or issue cards.

  • Schedules and shifts

    We set up work schedules, shifts, breaks and days off in the software.

  • Reports and timesheets

    We show you how to export a timesheet, correct a missed clock-in and view late arrivals.

A time and attendance system from LAGI in Tbilisi consists of a terminal at the entrance and software for turning staff clock-ins into a timesheet. Employees clock in at the terminal in the morning and clock out in the evening, and the accounts department gets the month's hours, late arrivals and overtime without paper registers. We choose a terminal to suit the number of employees and the conditions at the entrance, then handle the installation, staff enrolment and work schedules. The engineer's site survey in Tbilisi is free.

Face, fingerprint, palm or card

Clock-in methodAdvantagesLimitations
FaceContactless, fast with a flow of people, usable with gloves onA more expensive terminal; the face needs light from the front, not from behind
FingerprintInexpensive; a clock-in cannot be passed to a colleagueFingerprints of builders and people with damaged skin are read less reliably
PalmContactless; cuts and dirt affect palm recognition lessNot available on every model
CardThe cheapest option, suits any shiftA card can be forgotten or handed to someone else

On many terminals, methods can be combined: face recognition as the main one, and a card or code as a fallback for people whose face is not recognised.

Terminals we install

We install ZKTeco biometric terminals (the SpeedFace, SenseFace and FaceDepot series, among others) with face, fingerprint or palm recognition; many models also have a card reader. On simpler FingerTec and ZKTeco time and attendance terminals, staff clock in with a fingerprint or a card. Models differ in memory capacity (how many employees can be stored), connection method, and whether a door lock can be controlled from the same terminal.

How clock-ins reach the timesheet

Clock-ins are stored in the terminal's memory. There are three ways to retrieve them:

  • over the local network (TCP/IP) or Wi-Fi – clock-ins from all terminals are collected automatically by software on a computer;
  • through a cloud service – convenient if your branches are in different parts of the city;
  • to a USB flash drive directly from the terminal – for a small office without a permanent connection.

In the software, for example ZKBio Time, you set schedules, shifts, lunch breaks and days off. Late arrivals, early departures and overtime are calculated automatically, and a timesheet can be exported for any period. At handover we show the person in charge how to correct a missed clock-in and generate a report.

Time and attendance and door access in one terminal

The entrance terminal can also be used to open the door. An employee places a finger on the scanner or looks at the camera once: the lock opens and the clock-in is recorded in the timesheet. This costs less than two separate systems. How access control is arranged on the other doors is described on our access control installation page.

What affects the price

  • The number of terminals and the clock-in method: face recognition costs more than fingerprint, and fingerprint more than card.
  • Whether you need software with reports, or exporting from the terminal is enough.
  • The number of branches and how they are connected.
  • Connection to the door lock, and cabling and power to the terminal.

After the free site survey you receive an estimate, and you can request a quote on our website.

Sites we work on

Time and attendance tracking is needed wherever people work to a schedule: in offices, in shops and chains with several outlets, in warehouses with shift work, and in schools and kindergartens. The terminals, the system and the installation are covered by the LAGI warranty; its conditions are on our warranty page.

How it goes

  1. 01

    Free site survey in Tbilisi

    We look at the entrances, lighting and network, and discuss working hours and the number of employees.

  2. 02

    Selection and estimate

    We propose terminals and software, and calculate the cost of the equipment and work.

  3. 03

    Installation

    We mount the terminals and connect power, the network and the door lock if one is needed.

  4. 04

    Setup and training

    We enrol employees and schedules, and train the person in charge to work with reports.

Equipment for this service

Products we install as part of this service.

Questions & answers

How much does a time and attendance system cost?

The price is made up of the number of terminals, the clock-in method and the software. A single fingerprint or card terminal with export to a flash drive is the most affordable option. Face recognition terminals and networked software for several branches cost more. We give the exact figure after a site survey, which is free in Tbilisi.

What if an employee's fingerprint cannot be read?

Enrol a different finger or switch to another clock-in method. Fingerprints of builders, cooks and people with dry or damaged skin are often hard to read. Terminals with face or palm recognition suit them better, or a card or code can serve as a backup method on the same terminal.

Does time and attendance need the internet?

No, clock-ins are stored in the terminal's memory without the internet too. To transfer them to the software, the terminal is connected to the office's local network; the internet is needed only for a cloud service or for collecting data from branches. In a small office, clock-ins can be exported to a USB flash drive.

Can a time and attendance terminal be fooled?

A card clock-in can be made on behalf of a colleague, so where this matters, biometrics are the usual choice. On many face recognition terminals, a liveness check confirms that a real person is in front of the camera, not a photo or a phone screen. A fingerprint or palm cannot be passed to someone else. The log shows the time of every clock-in.

How do I get a timesheet for the accounts department?

Generate a report in the software for the period you need and export it to a file for the accounts department. Hours worked, late arrivals, early departures and overtime are calculated automatically against the set schedules. Missed clock-ins are corrected manually by the person in charge, with a comment. We show you all of this at handover.

Can one terminal record time and open the door?

Yes, many ZKTeco and FingerTec terminals support door lock control. An employee clocks in once, the door opens and the clock-in goes to the timesheet, so no separate reader is needed at the entrance. The other doors in the building get a standard access control system, managed in the same software.

Other services

Not sure what you need?

Book a free site survey in Tbilisi: an engineer walks the property with you and suggests a setup.