
Smart home installation
Wireless leak, smoke, gas, door and motion sensors, a siren, a panic button and smart plugs in a single app on your phone.
What's included
Choosing the sensors
We work out where leak, gas, smoke, opening and motion sensors are needed, and where to start.
No wall chasing
Wireless sensors are fixed with adhesive or screws, and your finishes stay untouched.
Gateway and app
We connect the gateway to the router, and add the devices to the app and your family members as users.
Automations
We set up the rules: a leak – siren and notification; the door at night – alarm.
Testing and training
We test every sensor and show you how to switch modes and view the event history.
Smart home installation in Tbilisi by LAGI brings wireless sensors and devices together in one app on your phone. A leak sensor under the washing machine, a gas detector by the boiler, opening sensors on doors and windows, a smoke detector in the hallway: when something happens, the siren sounds and a notification is sent to your phone. The sensors are battery-powered and mounted without chasing the walls, so they also suit an apartment that has already been renovated. An engineer visits your home free of charge and suggests where to start.
What can be connected
- Smart sensors: door and window opening, motion and presence, water leaks, vibration, temperature and humidity, plus a fall sensor for elderly people.
- Detectors for fire and poisoning risks: smoke, household gas and carbon monoxide.
- A wireless siren and a panic button: one press, and a notification goes to your family.
- Smart plugs with energy monitoring: a heater or water heater can be switched off from your phone.
- Air quality monitors and a smart doorbell.
All the devices in this section of our catalog are made by Heiman.
Zigbee, Wi-Fi or Matter
| Zigbee | Wi-Fi | Matter | |
|---|---|---|---|
| Connection | Via a gateway; coverage is extended by mains-powered devices | Each device connected directly to the router | A common standard; devices can be used in different apps |
| Sensor battery | Up to 10 years on some models | Usually 1–2 years | Depends on the model |
| Router load | Only the gateway connects to the router | Each device takes up a place on the network | Depends on the connection method |
| Where it fits | Many sensors, an apartment, a house | One or two devices without a gateway | When compatibility with other systems matters |
For a home with several sensors we usually suggest Zigbee and a gateway: batteries last longer and the Wi-Fi network is not overloaded. The gateway is connected to the router by cable or Wi-Fi, and some models have 4G.
Automations
An automation is an ‘if – then’ rule that runs in the app on its own. A few examples:
- a leak sensor is triggered – the siren sounds and every family member's phone gets a notification;
- the front door opens at night – the siren goes off;
- you leave home – arming mode switches on, and any motion now raises an alarm;
- an elderly relative presses the panic button or falls – you receive a notification.
Smart home and security
Smart home opening and motion sensors with a siren can serve as a wireless alarm for an apartment. For a house with grounds, a perimeter and many doors, a separate burglar alarm with a control panel and GSM alerts is more reliable, and the smart home stays in place for leaks, gas and convenience. Cameras can be added through our CCTV installation service.
What affects the price
- The number of sensors and devices, and whether a gateway is needed.
- The size of the apartment or house, and the number of floors.
- Automations and the number of app users.
The site survey in Tbilisi is free, and after it you receive an estimate. You can request a quote on our website.
Sites we work on
Smart home systems are installed in apartments, private houses and country houses, where it matters to find out about a leak or an open door in time. Our selections of systems for homes are collected in the Home section.
Warranty and maintenance
LAGI gives a warranty on the equipment and the installation work: the terms are set out in the contract, and the general conditions are on our warranty page. Before handover we test every sensor and automation and add your family members to the app. Batteries and sensor connections are checked during maintenance.
How it goes
- 01
Free site survey in Tbilisi
We walk round the apartment or house, mark sensor positions and check the Wi-Fi signal.
- 02
Selection and estimate
We propose a set of devices and automations, and calculate the cost.
- 03
Installation
We install the gateway and sensors, and connect the smart plugs and siren.
- 04
Setup and training
We set up the app and automations, and check notifications on your phones.
Equipment for this service
Products we install as part of this service.
Questions & answers
How much does smart home installation cost?
The price depends on the number of sensors and devices, the floor area and the automations. A gateway with a few leak and opening sensors is inexpensive, while a house with sensors in every room, sirens, smart plugs and automations costs more. We give the exact figure after a site survey, which is free in Tbilisi.
Where should I start with a smart home?
With sensors for the most expensive kinds of trouble: leaks under the washing machine and water heater, gas by the cooker and boiler, smoke in the hallway. The next step is opening sensors on the front door and a siren. Smart plugs, temperature sensors and convenience automations can be added to the same system later.
Will a smart home work without the internet?
Partly. Zigbee sensors are linked to the gateway by radio, and local automations, such as the siren on a leak, run without the internet. Notifications to your phone when you are away and control from the app need the internet. If the internet at the site is unreliable, a gateway with 4G is an option. During setup we show you which automations also work offline.
Can everything be controlled from one app?
Yes, if the devices are connected to one gateway or support a common standard. Heiman sensors, sirens, smart plugs and doorbells are all managed in one app, where the automations are set up too. Devices with Matter support can also be added to other compatible smart home apps.
How often do sensor batteries need replacing?
It depends on the sensor and the connection type. Zigbee sensors use less power: on some models the battery is rated for several years, on a few for up to 10 years. Batteries in Wi-Fi sensors run down faster, usually within one to two years. A low-battery warning appears in the app in advance, so the battery is replaced before the sensor goes offline.
How is a smart home different from a burglar alarm?
A burglar alarm is designed for protection against break-ins: a control panel with a backup battery, GSM alerts, perimeter detectors. A smart home has opening sensors too, plus leak, gas and smoke detectors and control of smart plugs. For an apartment a smart home is often enough; for a house with grounds, it is better to install an alarm as well.
Other services
Not sure what you need?
Book a free site survey in Tbilisi: an engineer walks the property with you and suggests a setup.