Skip to content
SESAME

SESAME SE-3NCS electric strike

Model
9370

Fail-safe electric strike with an NO/NC/COM status output, so the access controller receives the lock state.

On order

Price on request

Send a request. A manager will name the price and the delivery time during working hours.

Key specifications

Power supply
12VDC (24VDC need order)
Dimensions
10-12MM (KEEP)
All specifications

Description

The SESAME SE-3NCS is a fail-safe (NC) electric strike with an NO/NC/COM status output, so the access controller receives the lock state. When power is cut, the latch of the mechanical lock is released and the door opens.

  • NO/NC/COM lock status output.
  • 12 V DC power, 24 V DC to order; 200 mA at 12 V, 100 mA at 24 V.
  • 500 kg holding force.
  • Tested to 100000 cycles, CE marked.
  • Face plate 160 × 25 × 31 mm, 0.4 kg.

The status output is wired to a controller input during access control installation.

Specifications

General
CertificationsCE
Access control
Lock behaviour on power lossFAIL-SAFE (NC)
Lock status sensorNO/NC/COM
Power
Power supply12VDC (24VDC need order)
Current draw12 V/200 mA; 24 V/100 mA
Physical and environment
Dimensions10-12MM (KEEP)
Lock panel size160L × 25 W × 31H (MM)
Net weight0.4KG

FAQ

Why is door closer needed in Access Control System?

Door closer is essential in Access Control System for several reasons: 1) correct electric lock operation – lock closes only if door is fully closed, closer ensures this, 2) security – door always closes and locks, doesn't stay open, 3) energy efficiency – closed door maintains temperature, 4) comfort – requires no manual closing. Without closer, electric lock won't work correctly.

How to choose correct closer for door weight?

Closers are classified by EN 1154 standard by force (EN 1-7): EN 1-2 – 20-40kg (light doors, internal offices), EN 3-4 – 40-80kg (standard doors, most common), EN 5-6 – 80-120kg (heavy doors, entrances), EN 7 – 120-200kg (very heavy doors, fire-rated). Measure door weight and select corresponding EN class. Wrong choice leads to rapid wear or insufficient force.

Can door closer integrate with fire alarm?

Yes, electromagnetic Hold-Open closers integrate with fire alarm – door is fixed in open position by electromagnet, and when fire alarm activates, electromagnet releases and door automatically closes (fire-rated doors, evacuation routes). This is mandatory for EN 1154 and fire safety standards compliance. Integration with access control (remote release) is also possible.

Need it installed?

LAGI will deliver, install and set up the equipment and provide warranty service afterwards.