SESAME SE-6NC electric strike
- Model
- 9367
Electric strike with 1000 kg holding force and a switchable mode: without power the door either stays locked or opens, as set.
On order
Price on request
Send a request. A manager will name the price and the delivery time during working hours.
Key specifications
- Power supply
- 12VDC or 24VDC (need order)
Description
The SESAME SE-6NC is an electric strike for metal door frames with 1000 kg holding force. The strike takes the place of the strike plate of a mechanical lock; fitting needs only a hole drilled in the frame.
The mode is switchable: NO (fail secure) keeps the door locked without power, NC (fail safe) lets the door open when power is cut. Fail safe is usually chosen for doors on escape routes, fail secure where the door must stay locked during a power cut.
- 12 or 24 V DC power, voltage chosen when ordering.
- Current: 320 mA at 12 V, 160 mA at 24 V.
- Adjustable distance to the lock latch.
- 123 × 43 × 42 mm, 0.34 kg.
- Tested to 100000 cycles, CE certified.
The strike mode is matched to the door's requirements during access control installation.
Specifications
| Certifications | CE |
|---|
| Lock behaviour on power loss | Fail secure /Fail safe (NO & NC adjustment) |
|---|
| Power supply | 12VDC or 24VDC (need order) |
|---|---|
| Current draw | 12 V/320 mA; 24 V/160 mA |
| Lock panel size | 123L × 43 W × 42H (mm) |
|---|---|
| Net weight | 0.34 kg |
Used in solutions
FAQ
Why is door closer needed in Access Control System?
Door closer is essential in Access Control System for several reasons: 1) correct electric lock operation – lock closes only if door is fully closed, closer ensures this, 2) security – door always closes and locks, doesn't stay open, 3) energy efficiency – closed door maintains temperature, 4) comfort – requires no manual closing. Without closer, electric lock won't work correctly.
How to choose correct closer for door weight?
Closers are classified by EN 1154 standard by force (EN 1-7): EN 1-2 – 20-40kg (light doors, internal offices), EN 3-4 – 40-80kg (standard doors, most common), EN 5-6 – 80-120kg (heavy doors, entrances), EN 7 – 120-200kg (very heavy doors, fire-rated). Measure door weight and select corresponding EN class. Wrong choice leads to rapid wear or insufficient force.
Can door closer integrate with fire alarm?
Yes, electromagnetic Hold-Open closers integrate with fire alarm – door is fixed in open position by electromagnet, and when fire alarm activates, electromagnet releases and door automatically closes (fire-rated doors, evacuation routes). This is mandatory for EN 1154 and fire safety standards compliance. Integration with access control (remote release) is also possible.
Need it installed?
LAGI will deliver, install and set up the equipment and provide warranty service afterwards.