Skip to content
SESAME

SESAME SE-6NC-S electric strike

Model
9366

Electric strike with 1000 kg holding force and an NO/NC/COM lock status output, so the controller knows whether the lock is engaged.

On order

Price on request

Send a request. A manager will name the price and the delivery time during working hours.

Key specifications

Power supply
12VDC or 24VDC (need order)
All specifications

Description

The SESAME SE-6NC-S is an electric strike with 1000 kg holding force and a lock status output (NO/NC/COM): from this signal the access controller or alarm system can tell whether the door is locked.

The strike goes into a metal frame in place of the mechanical lock's strike plate, fitted in a drilled hole. The mode is switchable: NO (fail secure) keeps the door locked without power, NC (fail safe) lets the door open when power is removed.

  • 12 or 24 V DC, voltage set at order; 320 mA at 12 V, 160 mA at 24 V.
  • Adjustable distance to the mechanical lock's latch.
  • 123 × 43 × 42 mm, 0.34 kg.
  • Tested to 100000 cycles, high-temperature paint finish, CE certified.

The sensor output is wired to a controller input during access control installation.

Specifications

General
CertificationsCE
Access control
Lock behaviour on power lossFail secure or Fail safe (NO & NC adjustment)
Lock status sensorNO/NC/COM
Power
Power supply12VDC or 24VDC (need order)
Current draw12 V/320 mA; 24 V/160 mA
Physical and environment
Lock panel size123L × 43 W × 42H (mm)
Net weight0.34 kg

FAQ

Why is door closer needed in Access Control System?

Door closer is essential in Access Control System for several reasons: 1) correct electric lock operation – lock closes only if door is fully closed, closer ensures this, 2) security – door always closes and locks, doesn't stay open, 3) energy efficiency – closed door maintains temperature, 4) comfort – requires no manual closing. Without closer, electric lock won't work correctly.

How to choose correct closer for door weight?

Closers are classified by EN 1154 standard by force (EN 1-7): EN 1-2 – 20-40kg (light doors, internal offices), EN 3-4 – 40-80kg (standard doors, most common), EN 5-6 – 80-120kg (heavy doors, entrances), EN 7 – 120-200kg (very heavy doors, fire-rated). Measure door weight and select corresponding EN class. Wrong choice leads to rapid wear or insufficient force.

Can door closer integrate with fire alarm?

Yes, electromagnetic Hold-Open closers integrate with fire alarm – door is fixed in open position by electromagnet, and when fire alarm activates, electromagnet releases and door automatically closes (fire-rated doors, evacuation routes). This is mandatory for EN 1154 and fire safety standards compliance. Integration with access control (remote release) is also possible.

Need it installed?

LAGI will deliver, install and set up the equipment and provide warranty service afterwards.