Skip to content
ZKTeco

ZKTeco EB102 exit button

Model
9525

Mechanical exit button on a wide 115 × 70 mm stainless steel plate, with IK10 impact protection and a blue backlight.

On order

Price on request

Send a request. A manager will name the price and the delivery time during working hours.

Key specifications

Dimensions
115 * 70 * 28.6mm (L*W*H)
Operating temperature
-20°C ~ +50°C
All specifications

Description

The ZKTeco EB102 is a mechanical exit button on a wide stainless steel plate: a press from inside opens a door with an electric lock, no card or code needed.

  • 1.7 mm steel, IK10 impact rating.
  • Flat button head, copper-plated pins.
  • Blue LED backlight with a rated life of about 40000 h.
  • 12–24 V DC circuits, contacts rated at 5 A, built-in step-down converter.
  • 115 × 70 × 28.6 mm, operating range -20 to 50 °C, humidity 10–90 %.

The button is wired to the access controller or straight into the lock circuit; the scheme is chosen during access control installation.

Specifications

Access control
Exit button operationSelf-replication
Hardware
Lamp typeLED
Lamp life40000h (reference value)
Lamp colourBlue
Power
Switching voltageDC 12 ~ 24V
Rated current5A
Voltage conversionBuilt-in step-down converters
Physical and environment
Operating humidity10% - 90%
Storage temperature-20°C ~ +65°C
Dimensions115 * 70 * 28.6mm (L*W*H)
Impact protection (IK)IK10
MaterialT=1.7mm stainless steel plate
Pin materialCopper plated
Head shapePlane, power supply standard
Operating temperature-20°C ~ +50°C

FAQ

What's the difference between NO and NC contacts?

NO (Normally Open) – in normal state contact is open (no current flows). When you press button, contact closes and current flows → controller receives signal and door opens. This is most common type. NC (Normally Closed) – in normal state contact is closed (current flows). When you press button, contact opens and current stops → controller receives signal. Used in special cases. Most controllers require NO contact.

What type of exit button suits my facility?

Depends on facility type and environment. Offices/indoor doors – mechanical plastic button (cheap, sufficient). Public places/outdoor doors – vandal-resistant metal button (durable). Hospitals/hotels – contactless touchless button (hygienic, No Touch). Dark corridors/emergency exits – illuminated LED button (visible at night). Outdoor conditions – IP65/IP68 weatherproof button (rain, snow).

Can exit button be used on emergency exit?

Yes, but must comply with emergency exit requirements. On emergency exit, exit button must be: 1) visible and easily accessible (maximum 1.5m height), 2) illuminated LED with "PUSH TO EXIT" or "EMERGENCY EXIT" text, 3) connected to fail-safe lock (opens when power cuts), 4) additionally recommended Break Glass Emergency Release as backup solution. This is mandatory for fire safety standards compliance.

Need it installed?

LAGI will deliver, install and set up the equipment and provide warranty service afterwards.