Skip to content
ZKTeco

ZKTeco EX-802 exit button

Model
9530

Plastic exit button, 86 × 86 mm, with NO/COM contacts rated at 36 V DC, 3 A and a mechanical life of 100,000 presses.

On order

Price on request

Send a request. A manager will name the price and the delivery time during working hours.

Key specifications

Dimensions
86*86*38mm
Power supply
Max DC 36V,3A
Operating temperature
-10°C to 55°C
All specifications

Description

The ZKTeco EX-802 is an exit button in a flame-retardant ABS housing. A press from inside opens a door with an electric lock.

  • NO/COM contacts are normally open: a press closes the circuit and the controller gets the command to open.
  • Contact rating up to 36 V DC and 3 A.
  • Mechanical life of 100,000 presses.
  • 86 × 86 × 38 mm.
  • Operating range -10 to 55 °C, humidity up to 95 %.

Fitting the button with the lock and controller is part of access control installation.

Specifications

Access control
Exit button contactsNormal Open(NO,COM)
Exit button triggerPress
Power
Power supplyMax DC 36V,3A
Physical and environment
Operating humidity0% to 95%
Dimensions86*86*38mm
MaterialABS flame retardant material
Mechanical life100,000 times
Operating temperature-10°C to 55°C

FAQ

What's the difference between NO and NC contacts?

NO (Normally Open) – in normal state contact is open (no current flows). When you press button, contact closes and current flows → controller receives signal and door opens. This is most common type. NC (Normally Closed) – in normal state contact is closed (current flows). When you press button, contact opens and current stops → controller receives signal. Used in special cases. Most controllers require NO contact.

What type of exit button suits my facility?

Depends on facility type and environment. Offices/indoor doors – mechanical plastic button (cheap, sufficient). Public places/outdoor doors – vandal-resistant metal button (durable). Hospitals/hotels – contactless touchless button (hygienic, No Touch). Dark corridors/emergency exits – illuminated LED button (visible at night). Outdoor conditions – IP65/IP68 weatherproof button (rain, snow).

Can exit button be used on emergency exit?

Yes, but must comply with emergency exit requirements. On emergency exit, exit button must be: 1) visible and easily accessible (maximum 1.5m height), 2) illuminated LED with "PUSH TO EXIT" or "EMERGENCY EXIT" text, 3) connected to fail-safe lock (opens when power cuts), 4) additionally recommended Break Glass Emergency Release as backup solution. This is mandatory for fire safety standards compliance.

Need it installed?

LAGI will deliver, install and set up the equipment and provide warranty service afterwards.