SESAME SB40NT exit button
- Model
- 9152
No-touch exit button in a narrow 40 × 115 mm housing: 304 stainless steel faceplate and an IR sensor with 5–8 cm detection.
On order
Price on request
Send a request. A manager will name the price and the delivery time during working hours.
Key specifications
- Read range
- 5–8 cm
- Dimensions
- 40 × 115 × 25 mm
Description
The SESAME SB40NT is a no-touch exit button in a narrow, elongated 40 × 115 × 25 mm housing. The IR sensor is an infrared proximity sensor: the door opens when a hand comes within 5–8 cm of the panel.
- 304 stainless steel faceplate.
- High-sensitivity sensor, dual LED indicator.
- PC (polycarbonate) housing, resistant to heat and corrosion.
- Also available with an NO/NC/COM output.
The button is connected to the access controller or into the lock circuit during access control installation.
Specifications
| Read range | 5–8 cm |
|---|
| Dimensions | 40 × 115 × 25 mm |
|---|
Used in solutions
FAQ
What's the difference between NO and NC contacts?
NO (Normally Open) – in normal state contact is open (no current flows). When you press button, contact closes and current flows → controller receives signal and door opens. This is most common type. NC (Normally Closed) – in normal state contact is closed (current flows). When you press button, contact opens and current stops → controller receives signal. Used in special cases. Most controllers require NO contact.
What type of exit button suits my facility?
Depends on facility type and environment. Offices/indoor doors – mechanical plastic button (cheap, sufficient). Public places/outdoor doors – vandal-resistant metal button (durable). Hospitals/hotels – contactless touchless button (hygienic, No Touch). Dark corridors/emergency exits – illuminated LED button (visible at night). Outdoor conditions – IP65/IP68 weatherproof button (rain, snow).
Can exit button be used on emergency exit?
Yes, but must comply with emergency exit requirements. On emergency exit, exit button must be: 1) visible and easily accessible (maximum 1.5m height), 2) illuminated LED with "PUSH TO EXIT" or "EMERGENCY EXIT" text, 3) connected to fail-safe lock (opens when power cuts), 4) additionally recommended Break Glass Emergency Release as backup solution. This is mandatory for fire safety standards compliance.
Need it installed?
LAGI will deliver, install and set up the equipment and provide warranty service afterwards.