Skip to content
SESAME

SESAME SB40W/SB40WIP exit button

Model
9126

White no-touch exit button in a narrow 115 × 40 mm housing: 5–20 cm detection, 0–30 s lock delay, IP67-rated SB40WIP version.

On order

Price on request

Send a request. A manager will name the price and the delivery time during working hours.

Key specifications

Dimensions
115L × 40 W × 14H
All specifications

Description

The SESAME SB40W is a no-touch exit button with an IR sensor in a white ABS housing: the door opens when a hand is brought near the panel, with nothing to press. The SB40WIP version is rated IP67: dust-tight and able to withstand brief immersion in water.

  • Detection distance adjustable within 5–20 cm.
  • Lock delay 0–30 s: how long the lock stays released after triggering.
  • Status light: blue on standby, green when triggered.
  • 12–24 V DC power, NO/NC/COM output.
  • 115 × 40 × 14 mm housing.

Distance and delay are set on site during access control installation.

Specifications

Access control
Lock delay0-30s
Physical and environment
Dimensions115L × 40 W × 14H

FAQ

What's the difference between NO and NC contacts?

NO (Normally Open) – in normal state contact is open (no current flows). When you press button, contact closes and current flows → controller receives signal and door opens. This is most common type. NC (Normally Closed) – in normal state contact is closed (current flows). When you press button, contact opens and current stops → controller receives signal. Used in special cases. Most controllers require NO contact.

What type of exit button suits my facility?

Depends on facility type and environment. Offices/indoor doors – mechanical plastic button (cheap, sufficient). Public places/outdoor doors – vandal-resistant metal button (durable). Hospitals/hotels – contactless touchless button (hygienic, No Touch). Dark corridors/emergency exits – illuminated LED button (visible at night). Outdoor conditions – IP65/IP68 weatherproof button (rain, snow).

Can exit button be used on emergency exit?

Yes, but must comply with emergency exit requirements. On emergency exit, exit button must be: 1) visible and easily accessible (maximum 1.5m height), 2) illuminated LED with "PUSH TO EXIT" or "EMERGENCY EXIT" text, 3) connected to fail-safe lock (opens when power cuts), 4) additionally recommended Break Glass Emergency Release as backup solution. This is mandatory for fire safety standards compliance.

Need it installed?

LAGI will deliver, install and set up the equipment and provide warranty service afterwards.