Skip to content
SESAME

SESAME SB55-BR exit button

Model
9131

Wireless no-touch exit button with an acrylic panel: the open command goes by radio to a receiver up to 30 m away.

On order

Price on request

Send a request. A manager will name the price and the delivery time during working hours.

Key specifications

Dimensions
36 × 137 × 10 mm
All specifications

Description

The SESAME SB55-BR is a wireless no-touch exit button with an acrylic panel. The open command reaches the receiver by radio, so no cable runs between the button and the receiver, and the panel does not need to be touched.

  • Radio range to the receiver: up to 30 m.
  • Slim 36 × 137 × 10 mm housing.
  • Terminals: 12 V and GND for power, NO/NC/COM as the output to the lock or controller.

A wireless button makes sense where a cable to the button position is hard to run. The receiver position and wiring scheme are worked out during access control installation.

Specifications

Access control
Remote control rangeMax 30 meters
Exit button contacts12 V/GND/NO/NC/COM
Physical and environment
Dimensions36 × 137 × 10 mm

FAQ

What's the difference between NO and NC contacts?

NO (Normally Open) – in normal state contact is open (no current flows). When you press button, contact closes and current flows → controller receives signal and door opens. This is most common type. NC (Normally Closed) – in normal state contact is closed (current flows). When you press button, contact opens and current stops → controller receives signal. Used in special cases. Most controllers require NO contact.

What type of exit button suits my facility?

Depends on facility type and environment. Offices/indoor doors – mechanical plastic button (cheap, sufficient). Public places/outdoor doors – vandal-resistant metal button (durable). Hospitals/hotels – contactless touchless button (hygienic, No Touch). Dark corridors/emergency exits – illuminated LED button (visible at night). Outdoor conditions – IP65/IP68 weatherproof button (rain, snow).

Can exit button be used on emergency exit?

Yes, but must comply with emergency exit requirements. On emergency exit, exit button must be: 1) visible and easily accessible (maximum 1.5m height), 2) illuminated LED with "PUSH TO EXIT" or "EMERGENCY EXIT" text, 3) connected to fail-safe lock (opens when power cuts), 4) additionally recommended Break Glass Emergency Release as backup solution. This is mandatory for fire safety standards compliance.

Need it installed?

LAGI will deliver, install and set up the equipment and provide warranty service afterwards.