Skip to content
SESAME

SESAME SB6-Rct no-touch exit button

Model
9150

No-touch exit button on a rectangular 70 × 115 mm plate: the door opens with a wave of the hand, detection range 5–8 cm.

On order

Price on request

Send a request. A manager will name the price and the delivery time during working hours.

Key specifications

Read range
5–8 cm
Dimensions
70.0 × 115.0 × 26.0 mm
All specifications

Description

The SESAME SB6-Rct is a no-touch exit button on a rectangular plate: to open the door, a hand is held near the infrared (IR) sensor, with no need to touch the plate.

  • Detection range 5–8 cm, high-sensitivity sensor.
  • Dual LED indication.
  • Faceplate in 304 stainless steel.
  • Polycarbonate (PC) housing, resistant to heat and corrosion.
  • Also made with a NO/NC/COM output.
  • 70 × 115 × 26 mm.

Button, lock and controller are chosen together during access control installation.

Specifications

Cards and codes
Read range5–8 cm
Physical and environment
Dimensions70.0 × 115.0 × 26.0 mm

FAQ

What's the difference between NO and NC contacts?

NO (Normally Open) – in normal state contact is open (no current flows). When you press button, contact closes and current flows → controller receives signal and door opens. This is most common type. NC (Normally Closed) – in normal state contact is closed (current flows). When you press button, contact opens and current stops → controller receives signal. Used in special cases. Most controllers require NO contact.

What type of exit button suits my facility?

Depends on facility type and environment. Offices/indoor doors – mechanical plastic button (cheap, sufficient). Public places/outdoor doors – vandal-resistant metal button (durable). Hospitals/hotels – contactless touchless button (hygienic, No Touch). Dark corridors/emergency exits – illuminated LED button (visible at night). Outdoor conditions – IP65/IP68 weatherproof button (rain, snow).

Can exit button be used on emergency exit?

Yes, but must comply with emergency exit requirements. On emergency exit, exit button must be: 1) visible and easily accessible (maximum 1.5m height), 2) illuminated LED with "PUSH TO EXIT" or "EMERGENCY EXIT" text, 3) connected to fail-safe lock (opens when power cuts), 4) additionally recommended Break Glass Emergency Release as backup solution. This is mandatory for fire safety standards compliance.

Need it installed?

LAGI will deliver, install and set up the equipment and provide warranty service afterwards.