Skip to content
SESAME

SESAME SB862 exit button

Model
9121

Outdoor exit button in a housing 40 mm deep: IP66 protection and a square 86 × 86 mm plate in 304 stainless steel.

On order

Price on request

Send a request. A manager will name the price and the delivery time during working hours.

Key specifications

Dimensions
86L × 86 W × 40H
All specifications

Description

The SESAME SB862 is an exit button for outdoor installation in an 86 × 86 × 40 mm housing. The square plate is 1.8 mm 304 stainless steel.

  • IP66 protection against dust and powerful water jets, for entrances open to the weather.
  • Operating voltage 12 V DC.
  • NO/NC/COM contacts for wiring to an access controller or straight into the lock circuit.

The wiring scheme is chosen during access control installation.

Specifications

Access control
Exit button contactsNO/NC/COM
Physical and environment
Dimensions86L × 86 W × 40H
Material1.8 mm thick 304 stainless steel panel

FAQ

What's the difference between NO and NC contacts?

NO (Normally Open) – in normal state contact is open (no current flows). When you press button, contact closes and current flows → controller receives signal and door opens. This is most common type. NC (Normally Closed) – in normal state contact is closed (current flows). When you press button, contact opens and current stops → controller receives signal. Used in special cases. Most controllers require NO contact.

What type of exit button suits my facility?

Depends on facility type and environment. Offices/indoor doors – mechanical plastic button (cheap, sufficient). Public places/outdoor doors – vandal-resistant metal button (durable). Hospitals/hotels – contactless touchless button (hygienic, No Touch). Dark corridors/emergency exits – illuminated LED button (visible at night). Outdoor conditions – IP65/IP68 weatherproof button (rain, snow).

Can exit button be used on emergency exit?

Yes, but must comply with emergency exit requirements. On emergency exit, exit button must be: 1) visible and easily accessible (maximum 1.5m height), 2) illuminated LED with "PUSH TO EXIT" or "EMERGENCY EXIT" text, 3) connected to fail-safe lock (opens when power cuts), 4) additionally recommended Break Glass Emergency Release as backup solution. This is mandatory for fire safety standards compliance.

Need it installed?

LAGI will deliver, install and set up the equipment and provide warranty service afterwards.