Skip to content
SESAME

SESAME SB862L exit button

Model
9119

Exit button with a blue LED backlight and IP66 protection: 86 × 86 mm plate in 1.8 mm 304 steel, 12 V DC power.

On order

Price on request

Send a request. A manager will name the price and the delivery time during working hours.

Key specifications

Power supply
DC12 V
All specifications

Description

The SESAME SB862L is an exit button with a blue LED backlight, so the button is easy to find in the dark. 86 × 86 × 40 mm housing.

  • IP66-rated panel, protected against dust and powerful water jets.
  • 1.8 mm 304 stainless steel.
  • 12 V DC power.
  • NO/NC/COM contacts for wiring to an access controller or into the lock circuit.

During access control installation, the backlit button gets both the contact circuit and a 12 V supply.

Specifications

Access control
Exit button contactsNO/NC/COM
Power
Power supplyDC12 V
Physical and environment
Material1.8 mm thick 304 stainless steel

FAQ

What's the difference between NO and NC contacts?

NO (Normally Open) – in normal state contact is open (no current flows). When you press button, contact closes and current flows → controller receives signal and door opens. This is most common type. NC (Normally Closed) – in normal state contact is closed (current flows). When you press button, contact opens and current stops → controller receives signal. Used in special cases. Most controllers require NO contact.

What type of exit button suits my facility?

Depends on facility type and environment. Offices/indoor doors – mechanical plastic button (cheap, sufficient). Public places/outdoor doors – vandal-resistant metal button (durable). Hospitals/hotels – contactless touchless button (hygienic, No Touch). Dark corridors/emergency exits – illuminated LED button (visible at night). Outdoor conditions – IP65/IP68 weatherproof button (rain, snow).

Can exit button be used on emergency exit?

Yes, but must comply with emergency exit requirements. On emergency exit, exit button must be: 1) visible and easily accessible (maximum 1.5m height), 2) illuminated LED with "PUSH TO EXIT" or "EMERGENCY EXIT" text, 3) connected to fail-safe lock (opens when power cuts), 4) additionally recommended Break Glass Emergency Release as backup solution. This is mandatory for fire safety standards compliance.

Need it installed?

LAGI will deliver, install and set up the equipment and provide warranty service afterwards.