SESAME SB86B/SB86BIP exit button
- Model
- 9127
Black no-touch exit button in a square 86 × 86 mm housing: 5–20 cm detection, 0–30 s lock delay, SB86BIP version rated IP67.
On order
Price on request
Send a request. A manager will name the price and the delivery time during working hours.
Key specifications
- Dimensions
- 86L × 86 W × 14H
Description
The SESAME SB86B is a no-touch exit button with an IR sensor in a black, square 86 × 86 × 14 mm ABS housing. To open the door, a hand is brought close to the panel – no press needed.
- Detection distance adjustable from 5 to 20 cm.
- Lock delay 0–30 s: the time the lock stays released after triggering.
- Status light: blue on standby, green when triggered.
- 12–24 V DC power, NO/NC/COM output.
- SB86BIP: IP67 version, with a dust-tight housing protected during brief immersion in water.
Distance, delay and the lock wiring are set up during access control installation.
Specifications
| Lock delay | 0-30s |
|---|
| Dimensions | 86L × 86 W × 14H |
|---|
Used in solutions
FAQ
What's the difference between NO and NC contacts?
NO (Normally Open) – in normal state contact is open (no current flows). When you press button, contact closes and current flows → controller receives signal and door opens. This is most common type. NC (Normally Closed) – in normal state contact is closed (current flows). When you press button, contact opens and current stops → controller receives signal. Used in special cases. Most controllers require NO contact.
What type of exit button suits my facility?
Depends on facility type and environment. Offices/indoor doors – mechanical plastic button (cheap, sufficient). Public places/outdoor doors – vandal-resistant metal button (durable). Hospitals/hotels – contactless touchless button (hygienic, No Touch). Dark corridors/emergency exits – illuminated LED button (visible at night). Outdoor conditions – IP65/IP68 weatherproof button (rain, snow).
Can exit button be used on emergency exit?
Yes, but must comply with emergency exit requirements. On emergency exit, exit button must be: 1) visible and easily accessible (maximum 1.5m height), 2) illuminated LED with "PUSH TO EXIT" or "EMERGENCY EXIT" text, 3) connected to fail-safe lock (opens when power cuts), 4) additionally recommended Break Glass Emergency Release as backup solution. This is mandatory for fire safety standards compliance.
Need it installed?
LAGI will deliver, install and set up the equipment and provide warranty service afterwards.