Skip to content
SESAME

SESAME SB86T no-touch exit button

Model
9157

No-touch exit button with a sensitive IR sensor, a 304 stainless steel faceplate and a dual LED indicator.

On order

Price on request

Send a request. A manager will name the price and the delivery time during working hours.

Key specifications

Dimensions
86 × 86 × 25 mm
All specifications

Description

The SESAME SB86T is a no-touch exit button with an IR sensor: the door opens when a hand is brought up to the panel. 86 × 86 × 25 mm.

  • Sensitive IR sensor for a fast response.
  • Dual LED indicator.
  • 304 stainless steel faceplate; housing parts in PC plastic that resists heat and corrosion.
  • NO/NC/COM contacts (normally open, normally closed, common) for wiring to an access controller or straight into the lock circuit.

The wiring scheme is matched to the lock during access control installation.

Specifications

Physical and environment
Dimensions86 × 86 × 25 mm

FAQ

What's the difference between NO and NC contacts?

NO (Normally Open) – in normal state contact is open (no current flows). When you press button, contact closes and current flows → controller receives signal and door opens. This is most common type. NC (Normally Closed) – in normal state contact is closed (current flows). When you press button, contact opens and current stops → controller receives signal. Used in special cases. Most controllers require NO contact.

What type of exit button suits my facility?

Depends on facility type and environment. Offices/indoor doors – mechanical plastic button (cheap, sufficient). Public places/outdoor doors – vandal-resistant metal button (durable). Hospitals/hotels – contactless touchless button (hygienic, No Touch). Dark corridors/emergency exits – illuminated LED button (visible at night). Outdoor conditions – IP65/IP68 weatherproof button (rain, snow).

Can exit button be used on emergency exit?

Yes, but must comply with emergency exit requirements. On emergency exit, exit button must be: 1) visible and easily accessible (maximum 1.5m height), 2) illuminated LED with "PUSH TO EXIT" or "EMERGENCY EXIT" text, 3) connected to fail-safe lock (opens when power cuts), 4) additionally recommended Break Glass Emergency Release as backup solution. This is mandatory for fire safety standards compliance.

Need it installed?

LAGI will deliver, install and set up the equipment and provide warranty service afterwards.