ZKTeco CR Pro card issuer
- Model
- 9580
USB card issuer for ZKTeco access cards: data is written to each card in encrypted form, and only ZK encrypted cards are supported.
On order
Price on request
Send a request. A manager will name the price and the delivery time during working hours.
Description
The ZKTeco CR Pro is a card issuer with a USB connection to a computer. Used to issue ZKTeco access cards, with the data written to each card in encrypted form.
- For ZKTeco encrypted cards (ZK Encrypted Card) only.
- USB interface.
Staff cards are issued and registered in the system during access control installation.
FAQ
What's the difference between 125kHz and 13.56MHz readers?
125kHz (EM/HID Proximity) – older technology, cheap cards (0.5-1 lari), simple reading, not encrypted (can be cloned), 5-10cm distance, ideal for budget systems. 13.56MHz (Mifare/NFC) – modern technology, more expensive cards (1-3 lari), encrypted data (impossible to clone), 3-5cm distance, NFC smartphone compatibility, high security, recommended for new installations.
What is Wiegand interface and why is it needed?
Wiegand is standard communication protocol between reader and controller. It uses 3 wires: Data0, Data1, GND (sometimes +5V power). Wiegand 26 – 26-bit format (8-bit Facility Code + 16-bit Card Number), most common. Wiegand 34 – 34-bit format, more card numbers. Wiegand is industry standard and ensures compatibility with any controller regardless of manufacturer.
Can reader be used outdoors?
Yes, but you need to choose reader with appropriate IP rating. IP65 – protected from dust and water jets (rain, snow), suitable for outdoor use in sheltered locations (under canopy). IP67/IP68 – fully waterproof, can be submerged in water, ideal for fully outdoor conditions. Also choose vandal-resistant model with metal housing for outdoor installations. Operating temperature: -40°C to +70°C.
Need it installed?
LAGI will deliver, install and set up the equipment and provide warranty service afterwards.