Skip to content
ZKTeco

ZKTeco FR1300 fingerprint reader

Model
9506

Indoor slave reader for fingerprints and EM cards, connected over RS485 to ZKTeco InBio series biometric controllers.

On order

Price on request

Send a request. A manager will name the price and the delivery time during working hours.

Key specifications

Communication interfaces
RS485
Dimensions
88mm × 88mm × 33.6mm
Card type
125 kHz EM card reader, Optional IC Card reader
Power supply
DC 12V
Operating temperature
0°C ~ 45°C
All specifications

Description

The ZKTeco FR1300 is a slave fingerprint reader for indoor use. Connection is over RS485 to a ZKTeco master controller, for example an InBio series biometric controller, and the access decision is made by the controller.

  • ZKTeco infrared optical fingerprint sensor.
  • 125 kHz EM card reader, with an IC card module as an option.
  • 12 V DC power.
  • 88 × 88 × 33.6 mm, 0 to 45 °C operation at 20–80% humidity.

Reader and controller are linked on an RS485 line during access control installation.

Specifications

Biometrics
Fingerprint sensorZKTeco Infrared Optical Sensor
Cards and codes
Card type125 kHz EM card reader, Optional IC Card reader
Communication
Communication interfacesRS485
Software and functions
Optional functionsIC Card Module
Power
Power supplyDC 12V
Physical and environment
Operating humidity20% ~ 80%
Dimensions88mm × 88mm × 33.6mm
Operating temperature0°C ~ 45°C

FAQ

What's the difference between 125kHz and 13.56MHz readers?

125kHz (EM/HID Proximity) – older technology, cheap cards (0.5-1 lari), simple reading, not encrypted (can be cloned), 5-10cm distance, ideal for budget systems. 13.56MHz (Mifare/NFC) – modern technology, more expensive cards (1-3 lari), encrypted data (impossible to clone), 3-5cm distance, NFC smartphone compatibility, high security, recommended for new installations.

What is Wiegand interface and why is it needed?

Wiegand is standard communication protocol between reader and controller. It uses 3 wires: Data0, Data1, GND (sometimes +5V power). Wiegand 26 – 26-bit format (8-bit Facility Code + 16-bit Card Number), most common. Wiegand 34 – 34-bit format, more card numbers. Wiegand is industry standard and ensures compatibility with any controller regardless of manufacturer.

Can reader be used outdoors?

Yes, but you need to choose reader with appropriate IP rating. IP65 – protected from dust and water jets (rain, snow), suitable for outdoor use in sheltered locations (under canopy). IP67/IP68 – fully waterproof, can be submerged in water, ideal for fully outdoor conditions. Also choose vandal-resistant model with metal housing for outdoor installations. Operating temperature: -40°C to +70°C.

Need it installed?

LAGI will deliver, install and set up the equipment and provide warranty service afterwards.