Skip to content
ZKTeco

ZKTeco KR500 Series card reader

Model
9513

Wiegand card readers for 125 kHz EM or 13.56 MHz IC cards: read time up to 200 ms and an IP65 or IP64 housing, depending on the model.

On order

Price on request

Send a request. A manager will name the price and the delivery time during working hours.

Key specifications

Read range
KRxxx-E: Up to 10CMKRxxx-M: Up to 5CM
Power supply
DC 6-14V / Max.70mA
Operating temperature
-20°C to 65°C (-10° to +70°C)
All specifications

Description

The ZKTeco KR500 Series are card readers with a Wiegand output. The card number goes to the access controller, and the controller decides whether to open the door.

  • KR500, KR501, KR502 and KR503 models, each in an -E or -M version.
  • 125 kHz EM or 13.56 MHz IC cards, depending on the version.
  • -E version: Wiegand 26 and up to 10 cm read range; -M version: Wiegand 34 and up to 5 cm. The number in the format name is the card code length in bits.
  • Read time up to 200 ms.
  • Red and green LEDs, plus inputs for LED and buzzer control from the controller.
  • Textured ABS and polycarbonate housing: IP65 on the KR500, KR501 and KR503, IP64 on the KR502.
  • 6–14 V DC power, up to 70 mA, -20 to 65 °C operation.

The reader is wired to the controller on a Wiegand line during access control installation.

Specifications

Access control
Auxiliary inputsExternal LED ControlExternal Buzzer Control
Output formatKRxxx-E: 26bit Wiegand (Default)KRxxx-M: 34bit Wiegand (Default)
Cards and codes
Read rangeKRxxx-E: Up to 10CMKRxxx-M: Up to 5CM
Reading time≤ 200ms
Hardware
IndicatorsRed and Green LEDs; Yes
Power
Power supplyDC 6-14V / Max.70mA
Physical and environment
Operating humidity10% to 90% relative humidity non-condensing
Ingress protection (IP)KR500-E/M: IP65 KR501-E/M: IP65KR502-E/M: IP64KR503-E/M: IP65
MaterialABS + PC with texture
Operating temperature-20°C to 65°C (-10° to +70°C)

FAQ

What's the difference between 125kHz and 13.56MHz readers?

125kHz (EM/HID Proximity) – older technology, cheap cards (0.5-1 lari), simple reading, not encrypted (can be cloned), 5-10cm distance, ideal for budget systems. 13.56MHz (Mifare/NFC) – modern technology, more expensive cards (1-3 lari), encrypted data (impossible to clone), 3-5cm distance, NFC smartphone compatibility, high security, recommended for new installations.

What is Wiegand interface and why is it needed?

Wiegand is standard communication protocol between reader and controller. It uses 3 wires: Data0, Data1, GND (sometimes +5V power). Wiegand 26 – 26-bit format (8-bit Facility Code + 16-bit Card Number), most common. Wiegand 34 – 34-bit format, more card numbers. Wiegand is industry standard and ensures compatibility with any controller regardless of manufacturer.

Can reader be used outdoors?

Yes, but you need to choose reader with appropriate IP rating. IP65 – protected from dust and water jets (rain, snow), suitable for outdoor use in sheltered locations (under canopy). IP67/IP68 – fully waterproof, can be submerged in water, ideal for fully outdoor conditions. Also choose vandal-resistant model with metal housing for outdoor installations. Operating temperature: -40°C to +70°C.

Need it installed?

LAGI will deliver, install and set up the equipment and provide warranty service afterwards.