Skip to content
ZKTeco

ZKTeco KR600 Series card reader

Model
9512

Three ZKTeco Wiegand card reader models for 125 kHz EM or 13.56 MHz IC cards: up to 10 cm read range, IP65 or IP64 housing.

On order

Price on request

Send a request. A manager will name the price and the delivery time during working hours.

Key specifications

Read range
KRxxx-E: Up to 10CMKRxxx-M: Up to 5CM
Power supply
DC 6-14V / Max.70mA
Operating temperature
-20°C to 65°C (-10° to +70°C)
All specifications

Description

The ZKTeco KR600 Series are card readers for access controllers with a Wiegand input. The series has three models – KR600, KR601 and KR602 – each in an -E or -M version.

  • 125 kHz EM or 13.56 MHz IC cards, depending on the version.
  • -E: Wiegand 26 output, up to 10 cm; -M: Wiegand 34, up to 5 cm.
  • Read time up to 300 ms.
  • IP65 on the KR600 and KR601 for protection against water jets, IP64 on the KR602 against splashes.
  • Textured ABS and polycarbonate housing, red and green LEDs, inputs for LED and buzzer control.
  • 6–14 V DC power, up to 70 mA, -20 to 65 °C operation.

The model is matched to the mounting spot and the controller during access control installation.

Specifications

Access control
Auxiliary inputsExternal LED ControlExternal Buzzer Control
Output formatKRxxx-E: 26bit Wiegand (Default)KRxxx-M: 34bit Wiegand (Default)
Cards and codes
Read rangeKRxxx-E: Up to 10CMKRxxx-M: Up to 5CM
Reading time≤ 300ms
Hardware
IndicatorsYes; Red and Green LEDs
Power
Power supplyDC 6-14V / Max.70mA
Physical and environment
Operating humidity10% to 90% relative humidity non-condensing
Ingress protection (IP)KR600-E/M: IP65 KR601-E/M: IP65KR602-E/M: IP64
MaterialABS + PC with texture
Operating temperature-20°C to 65°C (-10° to +70°C)

FAQ

What's the difference between 125kHz and 13.56MHz readers?

125kHz (EM/HID Proximity) – older technology, cheap cards (0.5-1 lari), simple reading, not encrypted (can be cloned), 5-10cm distance, ideal for budget systems. 13.56MHz (Mifare/NFC) – modern technology, more expensive cards (1-3 lari), encrypted data (impossible to clone), 3-5cm distance, NFC smartphone compatibility, high security, recommended for new installations.

What is Wiegand interface and why is it needed?

Wiegand is standard communication protocol between reader and controller. It uses 3 wires: Data0, Data1, GND (sometimes +5V power). Wiegand 26 – 26-bit format (8-bit Facility Code + 16-bit Card Number), most common. Wiegand 34 – 34-bit format, more card numbers. Wiegand is industry standard and ensures compatibility with any controller regardless of manufacturer.

Can reader be used outdoors?

Yes, but you need to choose reader with appropriate IP rating. IP65 – protected from dust and water jets (rain, snow), suitable for outdoor use in sheltered locations (under canopy). IP67/IP68 – fully waterproof, can be submerged in water, ideal for fully outdoor conditions. Also choose vandal-resistant model with metal housing for outdoor installations. Operating temperature: -40°C to +70°C.

Need it installed?

LAGI will deliver, install and set up the equipment and provide warranty service afterwards.