Skip to content
ZKTeco

ZKTeco KR702E/M card reader with touch keypad

Model
9511

Card reader with a touch keypad in an IP65 acrylic housing: 125 kHz (Wiegand 26) or 13.56 MHz (Wiegand 34) versions, up to 8 cm read range.

On order

Price on request

Send a request. A manager will name the price and the delivery time during working hours.

Key specifications

Dimensions
113 x 75 x 16mm (LxWxH)
Read range
0 ~ 8cm (Different according to different working conditions and different card)
Card frequency
KR702E: 125KHzKR702M: 13.56MHz
Power supply
12V DC, < 90mA
Operating temperature
0 °C - 70 °C
All specifications

Description

The ZKTeco KR702E/M is a card reader with a touch keypad in an acrylic housing. The IP65 rating allows outdoor mounting.

  • KR702E: 125 kHz cards, Wiegand 26 output; KR702M: 13.56 MHz cards, Wiegand 34 output.
  • Read range up to 8 cm, depending on conditions and card type; read time under 80 ms.
  • 12 V DC power, under 90 mA.
  • 113 × 75 × 16 mm, 0 to 70 °C operation at 20–80% humidity.

The reader is wired to an access controller with a Wiegand input during access control installation.

Specifications

Access control
Wiegand interfaceKR702E: Wiegand 26KR702M: Wiegand 34
Cards and codes
Read range0 ~ 8cm (Different according to different working conditions and different card)
Reading time< 80ms
Card frequencyKR702E: 125KHzKR702M: 13.56MHz
Power
Power supply12V DC, < 90mA
Physical and environment
Operating humidity20% - 80%
Dimensions113 x 75 x 16mm (LxWxH)
Operating temperature0 °C - 70 °C

FAQ

What's the difference between 125kHz and 13.56MHz readers?

125kHz (EM/HID Proximity) – older technology, cheap cards (0.5-1 lari), simple reading, not encrypted (can be cloned), 5-10cm distance, ideal for budget systems. 13.56MHz (Mifare/NFC) – modern technology, more expensive cards (1-3 lari), encrypted data (impossible to clone), 3-5cm distance, NFC smartphone compatibility, high security, recommended for new installations.

What is Wiegand interface and why is it needed?

Wiegand is standard communication protocol between reader and controller. It uses 3 wires: Data0, Data1, GND (sometimes +5V power). Wiegand 26 – 26-bit format (8-bit Facility Code + 16-bit Card Number), most common. Wiegand 34 – 34-bit format, more card numbers. Wiegand is industry standard and ensures compatibility with any controller regardless of manufacturer.

Can reader be used outdoors?

Yes, but you need to choose reader with appropriate IP rating. IP65 – protected from dust and water jets (rain, snow), suitable for outdoor use in sheltered locations (under canopy). IP67/IP68 – fully waterproof, can be submerged in water, ideal for fully outdoor conditions. Also choose vandal-resistant model with metal housing for outdoor installations. Operating temperature: -40°C to +70°C.

Need it installed?

LAGI will deliver, install and set up the equipment and provide warranty service afterwards.