Skip to content
ZKTeco

ZKTeco MR100/MR101 card reader

Model
9515

Contactless card reader in a metal housing with anti-tamper protection and IP66: Wiegand 26/34 output, operation down to -40 °C.

On order

Price on request

Send a request. A manager will name the price and the delivery time during working hours.

Key specifications

Dimensions
103 * 48 * 19mm
Read range
3 ~ 8cm
Power supply
MR100: 9-18V DCMR101: 9-24V DC
Card frequency
125KHz / 13.56MHz
Operating temperature
- 40°C ~ 60°C
All specifications

Description

The ZKTeco MR100 and MR101 are contactless card readers in a metal housing with protection against removal and prying. The Wiegand 26/34 output suits access controllers with a Wiegand input, and the wiring is simple.

  • 125 kHz / 13.56 MHz cards, 3–8 cm read range.
  • IP66 and -40 to 60 °C operation at 10–85% humidity, for outdoor mounting.
  • MR100: 9–18 V DC power, up to 25 mA; MR101: 9–24 V DC, up to 35 mA.
  • 103 × 48 × 19 mm, 300 g.

The reader is mounted by the door and wired to the controller during access control installation.

Specifications

Access control
Wiegand interface26 / 34bits
Cards and codes
Read range3 ~ 8cm
Card frequency125KHz / 13.56MHz
Power
Power supplyMR100: 9-18V DCMR101: 9-24V DC
Current drawMR100: ≤ 25mAMR101: ≤ 35mA
Physical and environment
Operating humidity10% ~ 85%
Ingress protection (IP)IP66
Dimensions103 * 48 * 19mm
Net weight300g
Wire length45mm ± 10mm
Operating temperature- 40°C ~ 60°C

FAQ

What's the difference between 125kHz and 13.56MHz readers?

125kHz (EM/HID Proximity) – older technology, cheap cards (0.5-1 lari), simple reading, not encrypted (can be cloned), 5-10cm distance, ideal for budget systems. 13.56MHz (Mifare/NFC) – modern technology, more expensive cards (1-3 lari), encrypted data (impossible to clone), 3-5cm distance, NFC smartphone compatibility, high security, recommended for new installations.

What is Wiegand interface and why is it needed?

Wiegand is standard communication protocol between reader and controller. It uses 3 wires: Data0, Data1, GND (sometimes +5V power). Wiegand 26 – 26-bit format (8-bit Facility Code + 16-bit Card Number), most common. Wiegand 34 – 34-bit format, more card numbers. Wiegand is industry standard and ensures compatibility with any controller regardless of manufacturer.

Can reader be used outdoors?

Yes, but you need to choose reader with appropriate IP rating. IP65 – protected from dust and water jets (rain, snow), suitable for outdoor use in sheltered locations (under canopy). IP67/IP68 – fully waterproof, can be submerged in water, ideal for fully outdoor conditions. Also choose vandal-resistant model with metal housing for outdoor installations. Operating temperature: -40°C to +70°C.

Need it installed?

LAGI will deliver, install and set up the equipment and provide warranty service afterwards.