ZKTeco MR1010/MR1020 card reader
- Model
- 9514
Vandal-resistant card reader rated IK10 and IP66: MR1010 for 125 kHz EM cards, MR1020 for 13.56 MHz S50 and S70 cards.
On order
Price on request
Send a request. A manager will name the price and the delivery time during working hours.
Key specifications
- Card type
- EM card, S50, S70
- Dimensions
- 105 * 49 * 21 (mm) (W*H*D)
- Read range
- 2 ~ 6cm
- Card frequency
- 125KHz & 13.56MHz
- Power supply
- 9 - 24V DC
- Operating temperature
- - 40°C ~ 60°C
Description
The ZKTeco MR1010 and MR1020 are card readers for places that need protection against impact and weather: IK10 is the highest impact resistance class, IP66 means protection against dust and powerful water jets. The MR1010 is for 125 kHz cards, the MR1020 for 13.56 MHz.
- EM cards on the MR1010, S50 and S70 cards on the MR1020; 2–6 cm read range.
- Wiegand 26/34 output.
- 9–24 V DC power, up to 50 mA.
- 105 × 49 × 21 mm, 240 g, -40 to 60 °C operation at 20–80% humidity.
A reader for an outdoor entrance is wired to the controller during access control installation.
Specifications
| Wiegand interface | 26 / 34bits |
|---|
| Card type | EM card, S50, S70 |
|---|---|
| Read range | 2 ~ 6cm |
| Card frequency | 125KHz & 13.56MHz |
| Current draw | ≤ 50mA |
|---|---|
| Power supply | 9 - 24V DC |
| Operating humidity | 20% ~ 80% |
|---|---|
| Ingress protection (IP) | IK10 & IP66 |
| Dimensions | 105 * 49 * 21 (mm) (W*H*D) |
| Net weight | 240g |
| Gross weight | 270g |
| Operating temperature | - 40°C ~ 60°C |
FAQ
What's the difference between 125kHz and 13.56MHz readers?
125kHz (EM/HID Proximity) – older technology, cheap cards (0.5-1 lari), simple reading, not encrypted (can be cloned), 5-10cm distance, ideal for budget systems. 13.56MHz (Mifare/NFC) – modern technology, more expensive cards (1-3 lari), encrypted data (impossible to clone), 3-5cm distance, NFC smartphone compatibility, high security, recommended for new installations.
What is Wiegand interface and why is it needed?
Wiegand is standard communication protocol between reader and controller. It uses 3 wires: Data0, Data1, GND (sometimes +5V power). Wiegand 26 – 26-bit format (8-bit Facility Code + 16-bit Card Number), most common. Wiegand 34 – 34-bit format, more card numbers. Wiegand is industry standard and ensures compatibility with any controller regardless of manufacturer.
Can reader be used outdoors?
Yes, but you need to choose reader with appropriate IP rating. IP65 – protected from dust and water jets (rain, snow), suitable for outdoor use in sheltered locations (under canopy). IP67/IP68 – fully waterproof, can be submerged in water, ideal for fully outdoor conditions. Also choose vandal-resistant model with metal housing for outdoor installations. Operating temperature: -40°C to +70°C.
Need it installed?
LAGI will deliver, install and set up the equipment and provide warranty service afterwards.