Skip to content
ZKTeco

ZKTeco ProID RS485 Series card reader

Model
9578

Card readers with RS485 output for ZKTeco InBio Pro controllers: 125 kHz EM, 13.56 MHz IC or DESFire cards, IP65 housing.

On order

Price on request

Send a request. A manager will name the price and the delivery time during working hours.

Key specifications

Dimensions
ProID20 / 30-RS: 90 × 90 ×16mm
Power supply
7 ~ 13V DC
Read range
≥ 5cm
Operating temperature
-20°C ~ 65°C
All specifications

Description

The ZKTeco ProID RS485 Series are card readers with an RS485 output for ZKTeco InBio160 Pro, InBio260 Pro and InBio460 Pro controllers. RS485 is a bus: several devices share one line.

  • 125 kHz EM, 13.56 MHz IC or DESFire card technology, depending on the version.
  • ProID20-RS and ProID30-RS models, 90 × 90 × 16 mm ABS and polycarbonate housing, IP65.
  • Read range of 5 cm or more, read time up to 300 ms.
  • Inputs for LED and buzzer control, pulsing white standby light, red and green LEDs.
  • 7–13 V DC power, under 80 mA; -20 to 65 °C operation.

The readers are wired to the InBio Pro controller over RS485 during access control installation.

Specifications

Access control
Auxiliary inputsExternal LED Control, External Buzzer Control
Compatible controllersInBio160 Pro, InBio260 Pro, InBio460 Pro
Output formatRS485
Cards and codes
Read range≥ 5cm
Reading time≤ 300ms
Hardware
IndicatorsBeep; Pulsing White Standby Light / Red and Green LEDs
Power
Power supply7 ~ 13V DC
Current draw< 80mA
Physical and environment
Operating humidity10% ~ 90% Relative Humidity, Non-Condensing
Ingress protection (IP)IP65
DimensionsProID20 / 30-RS: 90 × 90 ×16mm
MaterialABS + PC
Operating temperature-20°C ~ 65°C

FAQ

What's the difference between 125kHz and 13.56MHz readers?

125kHz (EM/HID Proximity) – older technology, cheap cards (0.5-1 lari), simple reading, not encrypted (can be cloned), 5-10cm distance, ideal for budget systems. 13.56MHz (Mifare/NFC) – modern technology, more expensive cards (1-3 lari), encrypted data (impossible to clone), 3-5cm distance, NFC smartphone compatibility, high security, recommended for new installations.

What is Wiegand interface and why is it needed?

Wiegand is standard communication protocol between reader and controller. It uses 3 wires: Data0, Data1, GND (sometimes +5V power). Wiegand 26 – 26-bit format (8-bit Facility Code + 16-bit Card Number), most common. Wiegand 34 – 34-bit format, more card numbers. Wiegand is industry standard and ensures compatibility with any controller regardless of manufacturer.

Can reader be used outdoors?

Yes, but you need to choose reader with appropriate IP rating. IP65 – protected from dust and water jets (rain, snow), suitable for outdoor use in sheltered locations (under canopy). IP67/IP68 – fully waterproof, can be submerged in water, ideal for fully outdoor conditions. Also choose vandal-resistant model with metal housing for outdoor installations. Operating temperature: -40°C to +70°C.

Need it installed?

LAGI will deliver, install and set up the equipment and provide warranty service afterwards.