Skip to content
ZKTeco

ZKTeco QR500 Series QR code and card reader

Model
9520

Reader for QR codes, barcodes and 13.56 MHz ISO/IEC 14443A cards: Mifare Ultralight, DESFire EV1, NTAG, S50 and S70.

On order

Price on request

Send a request. A manager will name the price and the delivery time during working hours.

Key specifications

Communication interfaces
Wiegand, RS485, USB
Card type
Mifare Uitralight, DESFure EV1,Ntag, S50 / S70
Dimensions
86 * 86 * 50mm
Card frequency
13.56MHz
Read range
QR ≥ 5CM, RFID Card ≥ 4CM
Power supply
DC 12V (±5%), USB 5V
All specifications

Description

The ZKTeco QR500 is a QR code and 13.56 MHz card reader for access control. Connection is to any controller with a Wiegand input, with RS485 and USB also available. Used in residential complexes, hotels, visitor management and unstaffed shops.

  • 13.56 MHz ISO/IEC 14443A cards: Mifare Ultralight, DESFire EV1, NTAG, S50 and S70.
  • QR, Data Matrix, PDF417, GS1 DataBar, Code 128 / EAN128, UPC / EAN, Codabar, Code 39 / 93 and other codes.
  • Read range of 5 cm or more for QR codes and 4 cm or more for cards.
  • 12 V DC (±5%) or 5 V USB power.
  • 86 × 86 × 50 mm, -10 to 50 °C operation at 20–80% humidity.

Visitor QR passes and resident cards are set up in one system during access control installation.

Specifications

Cards and codes
Card typeMifare Uitralight, DESFure EV1,Ntag, S50 / S70
Card frequency13.56MHz
Card standardISO / IEC 14443A RS485 Protocol
QR code and barcodeQR Code, Data Matrix, PDF417, GS1 Databar, Code 128 / EAN128, UPC / EAN, Codabar, Code39/93 etc.
Read rangeQR ≥ 5CM, RFID Card ≥ 4CM
Communication
Communication interfacesWiegand, RS485, USB
USB1000mm
Power
Power supplyDC 12V (±5%), USB 5V
Physical and environment
Operating humidity20% - 80%
Storage temperature-20°C ~ 80°C
Dimensions86 * 86 * 50mm
Operating temperature-10°C ~ 50°C

FAQ

What's the difference between 125kHz and 13.56MHz readers?

125kHz (EM/HID Proximity) – older technology, cheap cards (0.5-1 lari), simple reading, not encrypted (can be cloned), 5-10cm distance, ideal for budget systems. 13.56MHz (Mifare/NFC) – modern technology, more expensive cards (1-3 lari), encrypted data (impossible to clone), 3-5cm distance, NFC smartphone compatibility, high security, recommended for new installations.

What is Wiegand interface and why is it needed?

Wiegand is standard communication protocol between reader and controller. It uses 3 wires: Data0, Data1, GND (sometimes +5V power). Wiegand 26 – 26-bit format (8-bit Facility Code + 16-bit Card Number), most common. Wiegand 34 – 34-bit format, more card numbers. Wiegand is industry standard and ensures compatibility with any controller regardless of manufacturer.

Can reader be used outdoors?

Yes, but you need to choose reader with appropriate IP rating. IP65 – protected from dust and water jets (rain, snow), suitable for outdoor use in sheltered locations (under canopy). IP67/IP68 – fully waterproof, can be submerged in water, ideal for fully outdoor conditions. Also choose vandal-resistant model with metal housing for outdoor installations. Operating temperature: -40°C to +70°C.

Need it installed?

LAGI will deliver, install and set up the equipment and provide warranty service afterwards.