Skip to content
ZKTeco

ZKTeco card and fingerprint reader

Model
9532

ZKTeco reader for access control systems: a card reader, a fingerprint reader and a base for charging and data collection.

On order

Price on request

Send a request. A manager will name the price and the delivery time during working hours.

Description

The ZKTeco Reader is a card and fingerprint reader from the ZKTeco range. The maker's description lists a card reader, a fingerprint reader and a base for charging and data collection.

The set for the job and the connection to the system are chosen during access control installation.

FAQ

What's the difference between 125kHz and 13.56MHz readers?

125kHz (EM/HID Proximity) – older technology, cheap cards (0.5-1 lari), simple reading, not encrypted (can be cloned), 5-10cm distance, ideal for budget systems. 13.56MHz (Mifare/NFC) – modern technology, more expensive cards (1-3 lari), encrypted data (impossible to clone), 3-5cm distance, NFC smartphone compatibility, high security, recommended for new installations.

What is Wiegand interface and why is it needed?

Wiegand is standard communication protocol between reader and controller. It uses 3 wires: Data0, Data1, GND (sometimes +5V power). Wiegand 26 – 26-bit format (8-bit Facility Code + 16-bit Card Number), most common. Wiegand 34 – 34-bit format, more card numbers. Wiegand is industry standard and ensures compatibility with any controller regardless of manufacturer.

Can reader be used outdoors?

Yes, but you need to choose reader with appropriate IP rating. IP65 – protected from dust and water jets (rain, snow), suitable for outdoor use in sheltered locations (under canopy). IP67/IP68 – fully waterproof, can be submerged in water, ideal for fully outdoor conditions. Also choose vandal-resistant model with metal housing for outdoor installations. Operating temperature: -40°C to +70°C.

Need it installed?

LAGI will deliver, install and set up the equipment and provide warranty service afterwards.