Skip to content
ZKTeco

ZKTeco RS485 Reader Series card reader

Model
9510

Card readers with RS485 output for ZKTeco InBio160, InBio260 and InBio460 controllers: several readers share one controller port.

On order

Price on request

Send a request. A manager will name the price and the delivery time during working hours.

Key specifications

Read range
KRxxx-E: Up to 10CMKRxxx-M: Up to 5CM
Power supply
DC 6-14V / Max.70mA
Operating temperature
-20°C to 65°C (-10° to +70°C)
All specifications

Description

The ZKTeco RS485 Reader Series are card readers with an RS485 output for ZKTeco InBio160, InBio260 and InBio460 controllers. RS485 is a bus: several readers connect to one controller port, and the line can run up to 1200 m in theory.

  • Several readers on one port means more entry points per controller.
  • Read range up to 10 cm on -E versions and up to 5 cm on -M versions; read time up to 200 ms.
  • KR100M-RS: ABS and polycarbonate housing rated IP65.
  • Red and green LEDs, inputs for LED and buzzer control.
  • 6–14 V DC power, up to 70 mA; -20 to 65 °C operation.

The RS485 line is laid out and set up during access control installation.

Specifications

Access control
Auxiliary inputsExternal LED ControlExternal Buzzer Control
Compatible controllersInBio160, InBio260, InBio460
Output formatRS485
Cards and codes
Read rangeKRxxx-E: Up to 10CMKRxxx-M: Up to 5CM
Reading time≤ 200ms
Hardware
IndicatorsYes; Red and Green LEDs
Power
Power supplyDC 6-14V / Max.70mA
Physical and environment
Operating humidity10% to 90% relative humidity non-condensing
Ingress protection (IP)KR100M-RS: IP65
MaterialABS + PC with texture
Operating temperature-20°C to 65°C (-10° to +70°C)

FAQ

What's the difference between 125kHz and 13.56MHz readers?

125kHz (EM/HID Proximity) – older technology, cheap cards (0.5-1 lari), simple reading, not encrypted (can be cloned), 5-10cm distance, ideal for budget systems. 13.56MHz (Mifare/NFC) – modern technology, more expensive cards (1-3 lari), encrypted data (impossible to clone), 3-5cm distance, NFC smartphone compatibility, high security, recommended for new installations.

What is Wiegand interface and why is it needed?

Wiegand is standard communication protocol between reader and controller. It uses 3 wires: Data0, Data1, GND (sometimes +5V power). Wiegand 26 – 26-bit format (8-bit Facility Code + 16-bit Card Number), most common. Wiegand 34 – 34-bit format, more card numbers. Wiegand is industry standard and ensures compatibility with any controller regardless of manufacturer.

Can reader be used outdoors?

Yes, but you need to choose reader with appropriate IP rating. IP65 – protected from dust and water jets (rain, snow), suitable for outdoor use in sheltered locations (under canopy). IP67/IP68 – fully waterproof, can be submerged in water, ideal for fully outdoor conditions. Also choose vandal-resistant model with metal housing for outdoor installations. Operating temperature: -40°C to +70°C.

Need it installed?

LAGI will deliver, install and set up the equipment and provide warranty service afterwards.