Skip to content
FYB

FYB FY-6500MT conference controller with simultaneous interpretation

Model
FY-6500MT
SKU
FYB-440583

Central unit of a conference system with 63+1 channel simultaneous interpretation: wired and wireless units, voting, sign-in and camera tracking of the speaker.

On order

Price on request

Send a request. A manager will name the price and the delivery time during working hours.

Key specifications

Communication interfaces
EXTENSION port: connect conference system expansion equipment; DANTE port: connect to the external device of DANTE protocol
Power supply
100-240VAC
Frequency response
20 – 20KHz
Operating temperature
-10 °C to +60 °C
Interpretation channels
63+1 channels
All specifications

Description

The FYB FY-6500MT is a conference controller with simultaneous interpretation, for council chambers that need wired and wireless units at the same time. Digital interpretation on 63+1 channels: 63 interpretation channels plus the floor channel.

Audio and processing

  • Uncompressed transmission across 20 Hz – 20 kHz, signal-to-noise ratio above 80 dB, distortion under 0.05 %.
  • 28/56-bit DSP, sampling from 8 to 96 kHz, equalisation and noise reduction.
  • Built-in 2 × 50 W amplifier.
  • Balanced and unbalanced inputs and outputs, balanced XLR, EXTENSION port for external audio processors, DANTE.
  • USB for recording the meeting and playing background music.

Running the meeting

Microphone modes: FIFO, normal, voice and request; up to 8 wired and 6 wireless microphones open at once, and up to 5300 wired and 300 wireless units in total. Voting with results on the room screen as text, histograms and pie charts, and participant sign-in, including by IC card. Camera tracking of the speaker over RS-485 and RS-232 (PELCO-D, VISCA), and a fire alarm input for evacuation announcements.

6-pin cables with twist-lock connectors, IEC 60914 standard, 128-bit encryption and WPA/WPA2 for the wireless side. 100–240 V AC, 350 W, operating range -10 to 60 °C. The system for a room is put together when audio and public address systems are designed.

Specifications

General
CertificationsIEC60914
Control methodsFIFO/NORMAL/VOICE/APPLY
Capacity
Capacitywired microphone ≤ 5300; wireless microphone ≤ 300
Communication
Communication interfacesEXTENSION port: connect conference system expansion equipment; DANTE port: connect to the external device of DANTE protocol
EthernetNetwork port: No less 1x RJ45 for connection to a computer; WIFI network port: connect to wireless AP; PC network port: connect to the computer
USB1x for recording/playback
Hardware
DisplayTouchscreen control: 4.3-inch touchscreen TFT display; Touch screen control: 4.3 inches full-color touch screen
Power
Power supply100-240VAC
Power consumption350 W
Standby power consumption30 W
Audio
Frequency response20 – 20KHz
Signal-to-noise ratio>80 dB (A)
Total harmonic distortion<0.05%
ConnectorReliability of connection: Twist-lock connector; Connection method: Special cable (6-pin) with a twist-lock connector; Wired microphone connection method: special cable
Dynamic range>80 dB
Interpretation channels63+1 channels
Physical and environment
Operating temperature-10 °C to +60 °C
Operating humidity20% to 80% (non-condensing)

FAQ

What's the difference between wireless and wired conference system?

Wired conference system – all delegate units connected by cable to central controller, advantages: stable connection, no battery required, infinite operation. Disadvantages: complex installation (cable routing), not mobile, expensive installation. Wireless conference system – delegate units connect via RF (2.4GHz/5.8GHz) technology, advantages: fast installation (no cables required), mobile (easy relocation), elegant (no cables on table). Disadvantages: requires battery charging (8-12 hours), possible RF interference (rare). Recommendation: wireless – modern choice (mobile, elegant), wired – for permanent installations.

How many delegate units can connect to one controller?

Depends on controller model and RF frequency range. Small systems – 10-20 delegate units (small meetings, boardrooms). Medium systems – 30-50 delegate units (conference halls, universities). Large systems – 100-250 delegate units (large conferences, parliaments). Technical limitation: RF frequency range – in 2.4GHz range can support 50-100 units (depends on RF interference), in 5.8GHz range can support 100-250 units (less interference). Recommendation: if need >100 units → use 5.8GHz system or multiple controllers.

Can wireless conference system integrate with video conferencing?

Yes, wireless conference systems integrate with video conferencing systems (Zoom, Microsoft Teams, Cisco Webex) – controller audio output (Line Out, XLR) → video conferencing system input (Mic In), video conferencing system output (Speaker Out) → controller input (Line In) → delegate unit speakers. This allows: local participants hear remote participants in delegate unit speakers, remote participants hear local participants, automatic audio mixing (all microphones into one signal). Can also integrate with audio recording systems – automatic protocol creation.

Need it installed?

LAGI will deliver, install and set up the equipment and provide warranty service afterwards.