TIRAS
Tiras PRIME L conventional fire alarm control panel
- Model
- 6613
Tiras PRIME L conventional fire panel: 16 zones with up to 32 detectors each, and up to 16 expansion devices over RS-485.
On order
Price on request
Send a request. A manager will name the price and the delivery time during working hours.
Key specifications
- Zones
- Basic zones: 16; detectors per zone: 32; zone voltage: 24 V
- Communication interfaces
- Ethernet (built in); 2 × RS-485 (line length up to 1000 m); USB-C; GSM (with the M-2G module); 4G (M-LTE module)
- Power supply
- Main power supply: 220 V, 50 Hz; 2 monitored 24 V power outputs
- Dimensions
- 350 × 365 × 100 mm
- Operating temperature
- -5 °C – +40 °C
Description
The Tiras PRIME L is a conventional fire alarm control panel from the Tiras PRIME II series for medium sites such as an office, a private clinic or a small shopping centre. Zones run at 24 V, so a thinner cable can be used.
- 16 zones, up to 32 detectors in each.
- Up to 16 expansion devices over RS-485: up to 8 M-OUT8R or M-OUT2R box modules and up to 8 ECD Tiras 1X extinguishing control devices.
- 2 RS-485 interfaces and built-in Ethernet; the universal slot takes an M-2G or M-LTE communicator; 2 built-in relays and 2 alarm outputs.
- DETECTO PLUS mode with DETECTO 10 series detectors: the panel receives a signal when a smoke chamber is dirty or a heat sensor fails, and no end-of-line resistor is needed in the zone.
- Built-in 50 W power supply with surge protection and a selectable charging current; 2 lead-acid or LiFePO4 batteries of 7–8 Ah.
Enclosure 350 × 365 × 100 mm, 4 kg without the battery. LAGI designs and installs the system as part of fire alarm installation.
Specifications
| Zones | Basic zones: 16; detectors per zone: 32; zone voltage: 24 V |
|---|---|
| Outputs | “Fire”, “Fault”; 2 relay outputs for automation control; 2 transistor alarm outputs |
| Expansion | Up to 16 devices in total; up to 8 M-OUT8R or M-OUT2R box; up to 8 ECD Tiras 1X |
| Communication interfaces | Ethernet (built in); 2 × RS-485 (line length up to 1000 m); USB-C; GSM (with the M-2G module); 4G (M-LTE module) |
|---|
| Power supply | Main power supply: 220 V, 50 Hz; 2 monitored 24 V power outputs |
|---|---|
| Backup battery | 2 lead-acid or LiFePO4 batteries 7–8 Ah |
| Power supply unit rating | 50 W |
| Output current | 800 mA (2 outputs of 400 mA each) |
| Dimensions | 350 × 365 × 100 mm |
|---|---|
| Net weight | Weight (without battery): 4 kg |
| Ingress protection (IP) | IP30 |
| Operating temperature | -5 °C – +40 °C |
Need it installed?
LAGI will deliver, install and set up the equipment and provide warranty service afterwards.