Skip to content
TIRAS

Tiras PRIME M conventional fire alarm control panel

Model
6612

Tiras PRIME M conventional fire panel: 8 zones with up to 32 detectors each, and up to 8 expansion devices over RS-485.

On order

Price on request

Send a request. A manager will name the price and the delivery time during working hours.

Key specifications

Zones
Basic zones: 8; detectors per zone: 32; zone voltage: 24 V
Communication interfaces
RS-485 (bus length up to 1000 m); USB-C; GSM (with the M-2G module); 4G (M-LTE module); Wi-Fi (M-WiFi module); Ethernet (M-NET+ module)
Power supply
Main power supply: 220 V, 50 Hz; 2 monitored 24 V power outputs
Dimensions
280 × 280 × 80 mm
Operating temperature
-5 °C – +40 °C
All specifications

Description

The Tiras PRIME M is a conventional fire alarm control panel from the Tiras PRIME II series for small sites such as shops, restaurants, bank branches and small offices. Zones run at 24 V, so a thinner cable can be used.

  • 8 zones, up to 32 detectors in each.
  • Up to 8 expansion devices over RS-485: up to 4 M-OUT8R or M-OUT2R box modules and up to 4 ECD Tiras 1X extinguishing control devices.
  • 2 universal slots for communicators (M-2G, M-LTE, M-WiFi, M-NET+) or a relay module; 2 built-in relays for alarms or automation.
  • DETECTO PLUS mode with DETECTO 10 series detectors: the panel receives a signal when a smoke chamber is dirty or a heat sensor fails, and no end-of-line resistor is needed in the zone.
  • Built-in 35 W power supply with surge protection and a selectable charging current; one lead-acid or LiFePO4 battery of 7–8 Ah.

Enclosure 280 × 280 × 80 mm, 1.25 kg without the battery. LAGI designs and installs the system as part of fire alarm installation.

Specifications

Alarm system
ZonesBasic zones: 8; detectors per zone: 32; zone voltage: 24 V
Outputs“Fire”, “Fault”; 2 relay outputs for alarm notification or automation control
ExpansionUp to 8 devices in total; up to 4 M-OUT8R or M-OUT2R box; up to 4 ECD Tiras 1X
Communication
Communication interfacesRS-485 (bus length up to 1000 m); USB-C; GSM (with the M-2G module); 4G (M-LTE module); Wi-Fi (M-WiFi module); Ethernet (M-NET+ module)
Power
Power supplyMain power supply: 220 V, 50 Hz; 2 monitored 24 V power outputs
Backup batteryLead-acid or LiFePO4 battery 7–8 Ah
Power supply unit rating35 W
Output current800 mA (2 outputs of 400 mA each)
Physical and environment
Dimensions280 × 280 × 80 mm
Net weightWeight (without battery): 1.25 kg
Ingress protection (IP)IP30
Operating temperature-5 °C – +40 °C

Need it installed?

LAGI will deliver, install and set up the equipment and provide warranty service afterwards.