Skip to content
TIRAS

DETECTO HT10 Ex conventional heat detector

Model
6543

DETECTO HT10 Ex conventional microprocessor heat detector for hazardous areas, with DETECTO PLUS mode, in a white or black housing.

On order

Price on request

Send a request. A manager will name the price and the delivery time during working hours.

Key specifications

Power supply
10-30 V
Dimensions
110 × 48 mm
All specifications

Description

The DETECTO HT10 Ex is a conventional microprocessor heat detector for hazardous areas for Tiras PRIME and other conventional fire alarm panels.

  • Intrinsically safe design for boiler rooms, production sites, mills, grain elevators and stores of explosive substances; used with the MBI-2 barrier module.
  • Triggers when the temperature passes the class A2 or B threshold; suitable for kitchens and boiler rooms.
  • DETECTO PLUS mode with Tiras PRIME II panels: the panel gets a signal when the chamber is dirty or the sensor fails, and no end-of-line resistor is needed.
  • Indication of standby, fault and fire; a remote indicator can be connected.
  • Supply 10–30 V; 0.1 mA in standby, 16–31 mA in alarm; housing 110 × 48 mm, IP30.

LAGI selects and positions detectors as part of fire alarm installation.

Specifications

Alarm system
Temperature classA2 or B
Power
Power supply10-30 V
Current drawStandby current consumption: 0.1 mA; in fire alarm mode at 13.7 V: 16 mA; at 30 V: 31 mA
Physical and environment
Ingress protection (IP)IP30
Dimensions110 × 48 mm
Net weight120 g
ColorWhite, Black

FAQ

What's the difference between heat and smoke detectors?

Smoke detectors – detect smoke particles in air, faster response (several minutes earlier), ideal for living rooms, bedrooms, corridors, but cause false alarms in kitchen (cooking), bathroom (steam), garage (dust). Heat detectors – detect temperature rise, don't react to smoke/steam/dust, slower response (several minutes later), ideal for kitchens, bathrooms, garages, warehouses. Recommendation: smoke detectors – bedrooms, corridors. Heat detectors – kitchen, bathroom, garage. Combination – best protection.

What is Rate-of-Rise (ROR) function in heat detector?

Rate-of-Rise (ROR) is function that detects rapid temperature rise over time. How it works: detector measures temperature every second and calculates rise rate. If temperature rises more than 8-10°C/min, detector triggers even if temperature hasn't reached fixed threshold (e.g. 57°C). This provides faster response than fixed temperature detectors. Example: room temperature 20°C → fire starts → temperature rises 20°C → 35°C → 50°C (in 30 seconds) → ROR detector triggers at 50°C, fixed detector triggers at 57°C (10 seconds later).

Where should I use heat detectors instead of smoke detectors?

Heat detectors are recommended for locations where smoke detectors cause false alarms: 1) kitchen – cooking produces smoke/steam, heat detector doesn't react. 2) bathroom – hot water steam causes false alarm in smoke detector. 3) garage – dust, car exhaust, heat detector more reliable. 4) warehouse – dusty environment, heat detector doesn't react to dust. 5) attic/basement – high humidity, temperature fluctuations. 6) industrial facilities – welding, cutting, dusty processes. Important: heat detectors should not be used in bedrooms – use smoke detectors.

Need it installed?

LAGI will deliver, install and set up the equipment and provide warranty service afterwards.