Skip to content
TEKO

Astra-10 ver. 4 sounder-strobe

Model
9923

Sounder-strobe for intrusion and fire alarms: high-brightness LEDs, 12 or 24 V supply, IP65.

Pre-order

Price on request

Send a request. A manager will name the price and the delivery time during working hours.

Key specifications

Sound level
≥ 100 ± 2 dB
Power supply
9–27.6 V
Dimensions
Diameter: 124 mm; Height: 103 mm
Operating temperature
-30 °C – +55 °C
All specifications

Description

The Astra-10 ver. 4 is a sounder-strobe for intrusion and fire alarm systems. It is wired to an output of the alarm panel and warns about the state of the site. TEKO lists it as coming soon; it is protected against reverse polarity.

  • Works continuously around the clock; high-brightness LEDs.
  • Red housing with a clear lens.
  • Powered by 12 or 24 V DC.
  • Sound level ≥ 100 dB.
  • IP65 protection.

LAGI designs and installs the system as part of fire alarm installation.

Specifications

Hardware
Sound level≥ 100 ± 2 dB
Viewing angle180°
Power
Power supply9–27.6 V
Current drawCurrent draw at 12 V, light channel: 20.0 ± 2.0 mA; Current draw at 12 V, sound channel: 30.0 ± 3.0 mA; Current draw at 24 V, light channel: 25.0 ± 2.5 mA; Current draw at 24 V, sound channel: 50.0 ± 5.0 mA
Physical and environment
DimensionsDiameter: 124 mm; Height: 103 mm
Operating temperature-30 °C – +55 °C
Operating humidity≤ 93% at +40 °C
Ingress protection (IP)IP65

FAQ

Wired or wireless (433/868 MHz) siren – which to choose?

The choice depends on site type and installation complexity. Wired sirens (12V DC) – constant power from panel, no battery replacement needed, cheaper (30-80 GEL indoor, 80-180 GEL outdoor), most reliable, but require cable pulling from panel to siren (difficult in existing buildings). Ideal for: new construction, major renovation, new alarm systems. Wireless 433MHz sirens – battery powered (1-2 years), learning or rolling code for panel pairing, easy installation, price 60-120 GEL. Wireless 868MHz (Grade 2/3) – professional ecosystems (Ajax, Yale, Hikvision), AES 128 encryption, two-way monitoring (panel "sees" that siren is alive), jamming detection, 3-5 year battery, price 180-450 GEL. Recommendation: new site → wired (economical), existing apartment/house → wireless 433MHz (simple), high-security site → Grade 2/3 868MHz (cryptographic protection).

How many decibels are needed for indoor and outdoor sirens?

Decibel selection depends on location and site size – measured at 1 meter distance. Indoor siren: 95-105dB – sufficient for 1-2 room apartment (sound reaches neighbors through thin walls), 110-115dB – 3-4 room apartment or small office (sound reaches all rooms through closed doors), 115dB+ – large house or 200m² office. Outdoor siren: 110dB – villa, garage, small shop (audible within 50-100m radius), 115-120dB – large house, warehouse, commercial site (audible within 100-200m radius), 120dB+ – industrial site, open territory. Note: every +6dB = doubling of perceived loudness, sound power drops by 6dB with each doubling of distance (at 10m 110dB → at 20m ~104dB → at 40m ~98dB). Regulations: in Tbilisi residential zones, noise >85dB during night hours is restricted, but alarm activation is allowed as an exception (emergency situation).

How to connect a siren to the alarm panel?

Wired siren connects to the panel with 4 cables (2×0.75mm² or 2×1mm² 2-pair cable) – 1) +12V (red) – to panel SIREN+ output, 2) GND (black) – to panel SIREN- or GND, 3) TAMPER (yellow/green) – to panel TAMPER zone (NC contact, opening the siren housing → alarm), 4) BATTERY (blue, outdoor sirens only) – internal battery monitoring. Activation: panel activates the +12V SIREN output → siren emits 110-120dB audio + LED strobe. Time limit: panel typically cuts off the siren after 3-15 minutes (regulatory cut-off, to avoid disturbing neighbors at night). Power reserve: outdoor sirens have an internal battery for 6-12 hours (if burglar cuts panel power → siren still works). Panel programming: zone-to-siren mapping (which zone activation → which tone), tone selection (alarm/fire/chime) via DIP switch or panel menu, volume adjustment (low/medium/high).

Need it installed?

LAGI will deliver, install and set up the equipment and provide warranty service afterwards.