Skip to content
SESAME

SESAME S8 standalone access controller

Model
9220

Standalone access controller in an anti-vandal IP68 zinc alloy case: 2000 users, backlit keys, full programming from the keypad.

On order

Price on request

Send a request. A manager will name the price and the delivery time during working hours.

Description

The SESAME S8 is a standalone access controller in an electroplated, anti-vandal zinc alloy case. The IP68 rating covers dust and water, so outdoor mounting is possible. All settings are entered from the keypad, with no computer needed.

Access and settings

  • 2000 users; entry by card, by PIN or by card and PIN.
  • Response time under 20 ms, even with 2000 users enrolled.
  • Adjustable lock release time, alarm duration and door-open time.
  • Wiegand 26 output for connection to a controller as a reader.

Protection and status

  • Light-dependent resistor (LDR) for tamper detection: if the case is pulled off the wall, light reaches the sensor and the alarm goes off.
  • Short-circuit protection on the lock output.
  • 30 mA current draw.
  • Backlit keys, built-in buzzer, red, yellow and green status LEDs.

Lock release and alarm times are set to suit the site during access control installation.

FAQ

What's the difference between autonomic and network controllers?

Autonomic controllers work independently – store all users and records in internal memory, require no server or network, local programming. Ideal for 1-3 doors, small facilities. Network controllers connect to central server via TCP/IP network – real-time monitoring, centralized management, integration with other systems. Ideal for 5+ doors, large facilities.

How many users can be registered in autonomic controller?

Depends on model. Budget models – 500-1,000 users (small offices, residential homes). Standard models – 1,500-3,000 users (medium offices, warehouses). Internal memory stores 30,000-50,000+ records (entry/exit), sufficient for 6-12 months operation. Records exported to USB flash drive or PC software.

Can time zones be configured in autonomic controller?

Yes, professional autonomic controllers support time zones – you can configure when who can enter. Example: employees – Monday-Friday 9:00-18:00, managers – Monday-Friday 8:00-20:00, administrators – 24/7 all days. Holiday calendar can also be configured (controller won't allow employees on holidays).

Need it installed?

LAGI will deliver, install and set up the equipment and provide warranty service afterwards.