Skip to content
ZKTeco

ZKTeco EB103 exit button

Model
9524

Mechanical exit button on a rectangular 4 mm aluminium plate with black printed lettering and IK10 impact protection.

On order

Price on request

Send a request. A manager will name the price and the delivery time during working hours.

Key specifications

Dimensions
115mm * 70mm * 35mm (L*W*H)
Operating temperature
-20°C ~ +50°C
All specifications

Description

The ZKTeco EB103 is a mechanical exit button on a rectangular aluminium plate. A press from inside opens a door with an electric lock, no card or code needed.

  • 4 mm aluminium, vertical brushed finish, black printed lettering.
  • IK10 impact rating.
  • 12–24 V DC circuits, contacts rated at 5 A, built-in step-down converter.
  • 115 × 70 × 35 mm.
  • Operating range -20 to 50 °C, humidity 10–90 %.

Button, lock and controller are chosen together during access control installation.

Specifications

Access control
Exit button operationSelf-replication
Power
Switching voltageDC 12 ~ 24V
Rated current5A
Voltage conversionBuilt-in step-down converters
Physical and environment
Operating humidity10% - 90%
Storage temperature-20°C ~ +65°C
Dimensions115mm * 70mm * 35mm (L*W*H)
Impact protection (IK)IK10
Material4mm aluminum plate
FinishPrinted black characters + vertical drawing
Operating temperature-20°C ~ +50°C

FAQ

What's the difference between NO and NC contacts?

NO (Normally Open) – in normal state contact is open (no current flows). When you press button, contact closes and current flows → controller receives signal and door opens. This is most common type. NC (Normally Closed) – in normal state contact is closed (current flows). When you press button, contact opens and current stops → controller receives signal. Used in special cases. Most controllers require NO contact.

What type of exit button suits my facility?

Depends on facility type and environment. Offices/indoor doors – mechanical plastic button (cheap, sufficient). Public places/outdoor doors – vandal-resistant metal button (durable). Hospitals/hotels – contactless touchless button (hygienic, No Touch). Dark corridors/emergency exits – illuminated LED button (visible at night). Outdoor conditions – IP65/IP68 weatherproof button (rain, snow).

Can exit button be used on emergency exit?

Yes, but must comply with emergency exit requirements. On emergency exit, exit button must be: 1) visible and easily accessible (maximum 1.5m height), 2) illuminated LED with "PUSH TO EXIT" or "EMERGENCY EXIT" text, 3) connected to fail-safe lock (opens when power cuts), 4) additionally recommended Break Glass Emergency Release as backup solution. This is mandatory for fire safety standards compliance.

Need it installed?

LAGI will deliver, install and set up the equipment and provide warranty service afterwards.