Skip to content
SESAME

SESAME SBS flush-mount back box for exit buttons

Model
9202

Plastic back box for flush mounting SESAME SB1, SE1 and SB9 exit buttons: the box sits in the wall and only the button plate shows.

On order

Price on request

Send a request. A manager will name the price and the delivery time during working hours.

Key specifications

Dimensions
86 mm*86 mm*35 mm; 86.0 × 86.0 × 35.0 mm
All specifications

Description

The SESAME SBS is a plastic flush-mount back box for SESAME SB1, SE1 and SB9 exit buttons. The box is set into the wall, leaving only the button plate on show.

  • 86 × 86 × 35 mm.
  • 60 mm fixing pitch.

The recess for the box and the cable route are prepared during access control installation.

Specifications

Physical and environment
Dimensions86 mm*86 mm*35 mm; 86.0 × 86.0 × 35.0 mm

FAQ

What's the difference between NO and NC contacts?

NO (Normally Open) – in normal state contact is open (no current flows). When you press button, contact closes and current flows → controller receives signal and door opens. This is most common type. NC (Normally Closed) – in normal state contact is closed (current flows). When you press button, contact opens and current stops → controller receives signal. Used in special cases. Most controllers require NO contact.

What type of exit button suits my facility?

Depends on facility type and environment. Offices/indoor doors – mechanical plastic button (cheap, sufficient). Public places/outdoor doors – vandal-resistant metal button (durable). Hospitals/hotels – contactless touchless button (hygienic, No Touch). Dark corridors/emergency exits – illuminated LED button (visible at night). Outdoor conditions – IP65/IP68 weatherproof button (rain, snow).

Can exit button be used on emergency exit?

Yes, but must comply with emergency exit requirements. On emergency exit, exit button must be: 1) visible and easily accessible (maximum 1.5m height), 2) illuminated LED with "PUSH TO EXIT" or "EMERGENCY EXIT" text, 3) connected to fail-safe lock (opens when power cuts), 4) additionally recommended Break Glass Emergency Release as backup solution. This is mandatory for fire safety standards compliance.

Need it installed?

LAGI will deliver, install and set up the equipment and provide warranty service afterwards.