ZKTeco TLEB101 no-touch exit button
- Model
- 9528
No-touch exit button with an IR sensor in a square 86 × 86 mm SUS304 stainless steel housing, triggered by a hand 2–10 cm away.
On order
Price on request
Send a request. A manager will name the price and the delivery time during working hours.
Key specifications
- Dimensions
- 86mm * 86mm * 38mm (L*W*H)
- Operating temperature
- -20°C ~ +50°C
Description
The ZKTeco TLEB101 is a no-touch exit button with an IR sensor for access control systems: to open the door from inside, a hand is brought up to the panel. Square 86 × 86 × 38 mm housing in SUS304 stainless steel.
- Trigger distance 2–10 cm from the panel.
- Switching voltage 9–16 V DC, rated current 2 A.
- Operating range -20 to +50 °C, 10–90 % humidity.
- Storage temperature -20 to +65 °C.
The button, controller and lock are wired up during access control installation.
Specifications
| IR sensor range | 2 - 10cm |
|---|
| Switching voltage | DC 9 ~ 16V |
|---|---|
| Rated current | 2A |
| Operating humidity | 10% - 90% |
|---|---|
| Storage temperature | -20°C ~ +65°C |
| Dimensions | 86mm * 86mm * 38mm (L*W*H) |
| Material | SUS304 stainless steel |
| Operating temperature | -20°C ~ +50°C |
Used in solutions
FAQ
What's the difference between NO and NC contacts?
NO (Normally Open) – in normal state contact is open (no current flows). When you press button, contact closes and current flows → controller receives signal and door opens. This is most common type. NC (Normally Closed) – in normal state contact is closed (current flows). When you press button, contact opens and current stops → controller receives signal. Used in special cases. Most controllers require NO contact.
What type of exit button suits my facility?
Depends on facility type and environment. Offices/indoor doors – mechanical plastic button (cheap, sufficient). Public places/outdoor doors – vandal-resistant metal button (durable). Hospitals/hotels – contactless touchless button (hygienic, No Touch). Dark corridors/emergency exits – illuminated LED button (visible at night). Outdoor conditions – IP65/IP68 weatherproof button (rain, snow).
Can exit button be used on emergency exit?
Yes, but must comply with emergency exit requirements. On emergency exit, exit button must be: 1) visible and easily accessible (maximum 1.5m height), 2) illuminated LED with "PUSH TO EXIT" or "EMERGENCY EXIT" text, 3) connected to fail-safe lock (opens when power cuts), 4) additionally recommended Break Glass Emergency Release as backup solution. This is mandatory for fire safety standards compliance.
Need it installed?
LAGI will deliver, install and set up the equipment and provide warranty service afterwards.