ZKTeco TLEB301 touch exit button
- Model
- 9581
Touch exit button with a glass panel: the door opens with a light touch, or from optional 433 MHz radio remotes up to 15 m away.
On order
Price on request
Send a request. A manager will name the price and the delivery time during working hours.
Key specifications
- Power supply
- DC 12V 1A Current Draw ≤200mA
- Operating temperature
- 0°C to 45°C
- Dimensions
- 86*86*11.2mm (L*W*D)
Description
The ZKTeco TLEB301 is a touch exit button for indoor use. A capacitive sensor sits behind the glass, so a light touch on the glass is enough to open the door. The body is 86 × 86 mm and 11.2 mm thick, in black or white.
Panel and indicators
- 2.5D tempered glass panel with an anti-fingerprint coating, aluminium alloy frame.
- IK04 impact rating.
- Status light: white for standby, green for go, red for stop.
- Electrostatic discharge protection: ±6 kV contact, ±8 kV air.
Opening by radio remote
Up to 6 radio remotes at 433 MHz can be paired, with a range of 15 m, so the door can be opened without walking to the button. The remotes are sold separately.
Wiring and mounting
- 12 V DC power, current draw up to 200 mA.
- Compatible ZKTeco controllers: InBio and C3 series, EC16.
- Mounting on an Asian-standard gang box.
- Indoor use, 0 to 45 °C, 20–90 % RH non-condensing.
The button, remotes and controller are set up together during access control installation.
Specifications
| Compatible controllers | InBio Series, C3 Series, EC16 |
|---|---|
| Remote control frequency | 433 MHz |
| Remote control range | 15 m |
| Remote controls supported | Max. 6 remote control (Optional ; Separate purchases required). |
| Indicators | White: StandbyGreen: Go / Allow to Proceed Red: Stop / Do Not Proceed |
|---|---|
| Processor | CPU: Arm® Cortex®-M0 @ max. up to 48MHz |
| Power supply | DC 12V 1A Current Draw ≤200mA |
|---|---|
| Electrical protection | Contact Discharge ± 6KVAir discharge ± 8KV |
| Operating humidity | 20% to 90% RH (Non-condensing) |
|---|---|
| Ingress protection (IP) | IK04 (Vandal-Resistant) |
| Operating environment | Indoor |
| Material | Aluminium Alloy2.5D Tempered glass panel |
| Mounting | Asian gang box |
| Housing colour | Black & White |
| Operating temperature | 0°C to 45°C |
| Dimensions | 86*86*11.2mm (L*W*D) |
Used in solutions
FAQ
What's the difference between NO and NC contacts?
NO (Normally Open) – in normal state contact is open (no current flows). When you press button, contact closes and current flows → controller receives signal and door opens. This is most common type. NC (Normally Closed) – in normal state contact is closed (current flows). When you press button, contact opens and current stops → controller receives signal. Used in special cases. Most controllers require NO contact.
What type of exit button suits my facility?
Depends on facility type and environment. Offices/indoor doors – mechanical plastic button (cheap, sufficient). Public places/outdoor doors – vandal-resistant metal button (durable). Hospitals/hotels – contactless touchless button (hygienic, No Touch). Dark corridors/emergency exits – illuminated LED button (visible at night). Outdoor conditions – IP65/IP68 weatherproof button (rain, snow).
Can exit button be used on emergency exit?
Yes, but must comply with emergency exit requirements. On emergency exit, exit button must be: 1) visible and easily accessible (maximum 1.5m height), 2) illuminated LED with "PUSH TO EXIT" or "EMERGENCY EXIT" text, 3) connected to fail-safe lock (opens when power cuts), 4) additionally recommended Break Glass Emergency Release as backup solution. This is mandatory for fire safety standards compliance.
Need it installed?
LAGI will deliver, install and set up the equipment and provide warranty service afterwards.