Skip to content
ZKTeco

ZKTeco LB12/LB22/LB35 electric mortise bolt lock

Model
9535

Electric mortise bolt lock: the bolt retracts and the door opens when power is cut. 10–24 V DC power, three models with different features.

On order

Price on request

Send a request. A manager will name the price and the delivery time during working hours.

Key specifications

Power supply
DC 10V to 24V
All specifications

Description

The ZKTeco LB12, LB22 and LB35 are electric mortise bolt locks. The body is set into the door, and on a signal the bolt moves out into the door frame to lock the door. With the power off, the bolt retracts and the door is free.

How the models differ

  • LB12: 2 wires, either polarity; no locking delay and no door sensor; 0.445 kg.
  • LB22: 2 wires, red positive and black negative; locking delay of 0, 3 or 6 s; 0.719 kg.
  • LB35: 5 wires for power, the exit button (yellow, paired with black) and door sensor contacts COM and NO; delay of 0, 3 or 6 s; 0.719 kg.

On the LB22 and LB35 the door locks again if nobody pushes the door within 6 s of release.

Common data

  • 10–24 V DC power.
  • Cut-out 207 × 36 mm, recess at least 38 mm deep.
  • Plates of 215 × 41 × 0.7 mm and 205 × 35 × 3 mm.
  • SUS304 stainless steel lock cylinder.

For glass doors the locks are fitted with the LBB-1, LBB-2 and UBB-1 mounting kits. The model, power supply and controller are matched to the door during access control installation.

Specifications

Access control
Lock delayLB12: N / ALB22: 0s,3s,or 6s (adjustable)LB35: 0s,3s,or 6s (adjustable); LB12: N / ALB22: 6s (automatically locks the door again when no one pushes the door within 6s after unlocking)LB35 : 0s,3s,or 6s(adjustable)LB35: 6s (automatically locks the door again when no one pushes the door within 6s after unlocking)
Door sensorLB12: N / ALB22: N / ALB35: Supports
Power
Power supplyDC 10V to 24V
Physical and environment
Gross weightLB12: 0.445kgLB22: 0.719kgLB35: 0.719kg
WiringLB12: 2 wire Regardless + or -LB22: 2 wire Red: + Black: -LB35: 5 wire Red: + Black: - Yellow: Exit button (work with Black) White: Door sensor, COM Blue: Door sensor, NO
Lock cylinderSUS304 Stainless Steel
Cutout size207 * 36 (mm) (The depth of the inner pit is not less than 38mm) (L*W)
Lock panel size215 * 41 * 0.7 (mm) (L*W*H); 205 * 35 * 3 (mm) (L*W*H)

FAQ

What's the difference between fail-safe and fail-secure locks?

Fail-safe locks – open when power is cut (e.g. electromagnetic locks). Advantage: people can exit in emergency (fire, evacuation). Disadvantage: if power cuts, door opens (security risk). Used on evacuation exits. Fail-secure locks – stay locked when power is cut (e.g. electromechanical locks). Advantage: door stays locked when power cuts (high security). Disadvantage: requires backup power and mechanical key for emergency exit. Used in sensitive zones.

What holding force electromagnetic lock do I need?

Depends on door type and traffic. 280kg (600lbs) – standard indoor doors, offices, low traffic, single door. 350-400kg (800-900lbs) – heavy doors, metal doors, medium traffic, outdoor doors. 500-600kg (1200lbs) – very heavy doors, double doors, high traffic, high-security zones. Also consider: door weight, wind load (outdoor doors), traffic intensity. Always choose higher force than minimum requirement.

Can electronic lock be installed on existing door?

Yes, several options exist. Electric strike – cheapest option, installs in door frame, works with existing mechanical lock, minimal modification. Electromagnetic lock – surface mounting, no door cutting needed, simple installation, but visible. Electromechanical lock – requires door cutting (mortise), more complex installation, but higher security and aesthetics. Recommendation: Electric strike for existing doors, Maglock for new installations.

Need it installed?

LAGI will deliver, install and set up the equipment and provide warranty service afterwards.