Skip to content
ZKTeco

ZKTeco LL-01/LL-02/LL-03 electric motor lock

Model
9534

Electric lock with a motor-driven bolt: the door stays locked when power is off, with a mechanical life of 500000 cycles.

On order

Price on request

Send a request. A manager will name the price and the delivery time during working hours.

Key specifications

Card type
LL-01: N/ALL-02: N/ALL-03: 125kHz EM Card
Dimensions
LL-01: 129.8 * 105.8 * 39.2 (mm) (L*W*H)LL-02: 128 * 96 * 43(mm) (L*W*H)LL-03: 128 * 96 * 43 (mm) (L*W*H)
Power supply
LL-01: DC 12VLL-02: DC 12V to 18V (please select a voltage jumper of 18V, otherwise the circuit board may be damaged)LL-03: DC 12V
Operating temperature
-20°C to 60°C
All specifications

Description

The ZKTeco LL-01, LL-02 and LL-03 are electric motor locks: the bolt is driven by an electric motor. According to the manufacturer, the strengths of a conventional electric lock and a magnetic lock are combined here: less noise than the first, lower power draw than the second.

When power is off, the door is locked. From inside the secured area the door can still be opened, and the lock then stays open.

Models

  • LL-01: two white wires, either polarity; 12 V DC, 2.5 A; 129.8 × 105.8 × 39.2 mm, 1.46 kg.
  • LL-02: separate terminals for power (V+, GND) and the release signal (L+, L-), built-in door sensor; 12–18 V DC, under 25 mA on standby and 450 mA in operation; 128 × 96 × 43 mm, 1.5 kg.
  • LL-03: the same terminals, body and door sensor, plus an ARM+ alarm output and entry by 125 kHz EM card; 12 V DC; 1.6 kg. Supplied with a remote for adding and deleting users, and one EM card.

Every set includes 3 metal keys. Operating range -20 to 60 °C, mechanical life 500000 cycles. The lock, power supply and controller are wired up during access control installation.

Specifications

General
Package contentsLL-01: Lock: 1 Iron key: 3LL-02: Lock: 1 Iron key: 3LL-03: Lock: 1 Iron key: 3 Digital remote control: 1(add or delete users) EM Card:1
Access control
Access control interfacesLL-01: 2 white wire; regardless + or -LL-02: V+: positive electrode for power GND: negative electrode for power L-: negative electrode for unlock trigger L+: positive electrode for unlock triggerLL-03: V+: positive electrode for power GND: negative electrode for power L-: negative electrode for unlock trigger L+: positive electrode for unlock trigger ARM+: alarm
Lock behaviour on power lossOFF: lockWhen the power is off, it will lock the door. Users in the locked area can unlock the door, then the lock will stay unlocked.
Door sensorLL-01: N/ALL-02: Built-inLL-03: Built-in
Cards and codes
Card typeLL-01: N/ALL-02: N/ALL-03: 125kHz EM Card
Power
Current drawLL-01: 2.5A ±20%LL-02: Stand-by: < 25mA Working: 450mA ±5%LL-03: Stand-by: < 25mA Working: 450mA ±5%
Power supplyLL-01: DC 12VLL-02: DC 12V to 18V (please select a voltage jumper of 18V, otherwise the circuit board may be damaged)LL-03: DC 12V
Physical and environment
Gross weightLL-01: 1.46kgLL-02: 1.5kgLL-03: 1.6kg
DimensionsLL-01: 129.8 * 105.8 * 39.2 (mm) (L*W*H)LL-02: 128 * 96 * 43(mm) (L*W*H)LL-03: 128 * 96 * 43 (mm) (L*W*H)
Mechanical life500,000 times
Operating temperature-20°C to 60°C

FAQ

What's the difference between fail-safe and fail-secure locks?

Fail-safe locks – open when power is cut (e.g. electromagnetic locks). Advantage: people can exit in emergency (fire, evacuation). Disadvantage: if power cuts, door opens (security risk). Used on evacuation exits. Fail-secure locks – stay locked when power is cut (e.g. electromechanical locks). Advantage: door stays locked when power cuts (high security). Disadvantage: requires backup power and mechanical key for emergency exit. Used in sensitive zones.

What holding force electromagnetic lock do I need?

Depends on door type and traffic. 280kg (600lbs) – standard indoor doors, offices, low traffic, single door. 350-400kg (800-900lbs) – heavy doors, metal doors, medium traffic, outdoor doors. 500-600kg (1200lbs) – very heavy doors, double doors, high traffic, high-security zones. Also consider: door weight, wind load (outdoor doors), traffic intensity. Always choose higher force than minimum requirement.

Can electronic lock be installed on existing door?

Yes, several options exist. Electric strike – cheapest option, installs in door frame, works with existing mechanical lock, minimal modification. Electromagnetic lock – surface mounting, no door cutting needed, simple installation, but visible. Electromechanical lock – requires door cutting (mortise), more complex installation, but higher security and aesthetics. Recommendation: Electric strike for existing doors, Maglock for new installations.

Need it installed?

LAGI will deliver, install and set up the equipment and provide warranty service afterwards.