Skip to content
ZKTeco

ZKTeco ProID Multi-tech Series card reader

Model
9576

Dual-frequency card readers for 125 kHz and 13.56 MHz: ID, IC, NFC and DESFire EV1/EV2, RS485 and Wiegand output, IP66 housing with tamper switch.

On order

Price on request

Send a request. A manager will name the price and the delivery time during working hours.

Key specifications

Card type
IC/ ID/DESFire EV1, EV2/ NFC
Dimensions
90*90*16(mm) (L*W*H)
Power supply
7 ~ 13V DC
Read range
≥5cm
Authentication methods
ProID20 BEMD-RS: CardProID30 BEMD-RS: Card/ Card+Pin/ Pin
Operating temperature
-20 °C ~ 65 °C
All specifications

Description

The ZKTeco ProID Multi-tech Series are card readers for two frequencies at once, 125 kHz and 13.56 MHz. Different formats can share one door: ID, IC, NFC and DESFire EV1 and EV2, which are 13.56 MHz cards with data encryption.

  • ProID20 BEMD-RS: card access; ProID30 BEMD-RS: with a keypad for card, card plus PIN or PIN only.
  • RS485 and Wiegand: ZKTeco InBio160 Pro, InBio260 Pro and InBio460 Pro controllers, and third-party controllers.
  • Read range of 5 cm or more, read time up to 300 ms.
  • Tamper switch, inputs for LED and buzzer control, pulsing white standby light.
  • ABS and polycarbonate housing, 90 × 90 × 16 mm, IP66, -20 to 65 °C operation.
  • 7–13 V DC power, under 80 mA.

The reader is wired to the controller over RS485 or Wiegand during access control installation.

Specifications

General
CertificationsCE ; FCC
Biometrics
Authentication methodsProID20 BEMD-RS: CardProID30 BEMD-RS: Card/ Card+Pin/ Pin
Access control
Auxiliary inputsExternal LED Control, External Buzzer Control
Compatible controllersInBio160 Pro,InBio260 Pro, InBio460 Pro
Tamper protectionYes
Output formatRS485 & Wiegand
Cards and codes
Card typeIC/ ID/DESFire EV1, EV2/ NFC
Read range≥5cm
Reading time≤300ms
Hardware
KeypadProID30 BEMD-RS: ABS+PC
IndicatorsBeep; Pulsing White Standby Light / Red and Green LEDs
Power
Power supply7 ~ 13V DC
Current draw< 80mA
Physical and environment
Operating humidity10% to 90%RH
Ingress protection (IP)IP66
Dimensions90*90*16(mm) (L*W*H)
MaterialABS+PC
Operating temperature-20 °C ~ 65 °C

FAQ

What's the difference between 125kHz and 13.56MHz readers?

125kHz (EM/HID Proximity) – older technology, cheap cards (0.5-1 lari), simple reading, not encrypted (can be cloned), 5-10cm distance, ideal for budget systems. 13.56MHz (Mifare/NFC) – modern technology, more expensive cards (1-3 lari), encrypted data (impossible to clone), 3-5cm distance, NFC smartphone compatibility, high security, recommended for new installations.

What is Wiegand interface and why is it needed?

Wiegand is standard communication protocol between reader and controller. It uses 3 wires: Data0, Data1, GND (sometimes +5V power). Wiegand 26 – 26-bit format (8-bit Facility Code + 16-bit Card Number), most common. Wiegand 34 – 34-bit format, more card numbers. Wiegand is industry standard and ensures compatibility with any controller regardless of manufacturer.

Can reader be used outdoors?

Yes, but you need to choose reader with appropriate IP rating. IP65 – protected from dust and water jets (rain, snow), suitable for outdoor use in sheltered locations (under canopy). IP67/IP68 – fully waterproof, can be submerged in water, ideal for fully outdoor conditions. Also choose vandal-resistant model with metal housing for outdoor installations. Operating temperature: -40°C to +70°C.

Need it installed?

LAGI will deliver, install and set up the equipment and provide warranty service afterwards.