FingerTec QR 110 QR code reader
- Model
- 8405
QR code reader for FingerTec Ingressus controllers and FingerTec terminals: the administrator issues passes, and each entry is logged in the software.
On order
Price on request
Send a request. A manager will name the price and the delivery time during working hours.
Key specifications
- Card type
- Storage in primary
- Dimensions
- 86 x 40 x 86
- Power supply
- DC 9 ~ 16V
- Read range
- QR Code (cm): 3~10
- Compatible devices
- Q2i, R3, R2, Face ID 3, Face ID 5, Face ID 6, Kadex+, Ingressus I/II/IV
Description
The FingerTec QR 110 is a QR code reader for a FingerTec access system. The administrator issues QR passes to staff, and every entry is recorded in the system software.
- Connection to Ingressus I/II/IV controllers and to FingerTec Q2i, R3, R2, Face ID 3, Face ID 5, Face ID 6 and Kadex+ devices.
- User data is stored in the main device the reader is connected to.
- Wiegand 26/34 output, Wiegand line up to 100 m.
- QR code read range of 3–10 cm.
- 9–16 V DC power, under 100 mA.
- Indoor use: -10 to 70 °C at 10–70% humidity.
The reader is wired to a FingerTec controller or terminal during access control installation.
Specifications
| Output format | Wiegand 26/34 |
|---|
| Card type | Storage in primary |
|---|---|
| QR code and barcode | Storage in primary |
| Read range | QR Code (cm): 3~10 |
| Reading time | < 0.2 seconds; <0.5 seconds |
| Communication distance | Wiegand < 100m RS485 < 1200m |
|---|
| Processor | Managed by primary |
|---|---|
| Memory | Managed by primary |
| Compatible devices | Q2i, R3, R2, Face ID 3, Face ID 5, Face ID 6, Kadex+, Ingressus I/II/IV |
|---|
| Power supply | DC 9 ~ 16V |
|---|---|
| Current draw | < 100mA |
| Dimensions | 86 x 40 x 86 |
|---|---|
| Operating environment | Temperature (°C): -10 ~ 70 Humidity (%): 10 ~ 70 (Indoor use) |
FAQ
What's the difference between 125kHz and 13.56MHz readers?
125kHz (EM/HID Proximity) – older technology, cheap cards (0.5-1 lari), simple reading, not encrypted (can be cloned), 5-10cm distance, ideal for budget systems. 13.56MHz (Mifare/NFC) – modern technology, more expensive cards (1-3 lari), encrypted data (impossible to clone), 3-5cm distance, NFC smartphone compatibility, high security, recommended for new installations.
What is Wiegand interface and why is it needed?
Wiegand is standard communication protocol between reader and controller. It uses 3 wires: Data0, Data1, GND (sometimes +5V power). Wiegand 26 – 26-bit format (8-bit Facility Code + 16-bit Card Number), most common. Wiegand 34 – 34-bit format, more card numbers. Wiegand is industry standard and ensures compatibility with any controller regardless of manufacturer.
Can reader be used outdoors?
Yes, but you need to choose reader with appropriate IP rating. IP65 – protected from dust and water jets (rain, snow), suitable for outdoor use in sheltered locations (under canopy). IP67/IP68 – fully waterproof, can be submerged in water, ideal for fully outdoor conditions. Also choose vandal-resistant model with metal housing for outdoor installations. Operating temperature: -40°C to +70°C.
Need it installed?
LAGI will deliver, install and set up the equipment and provide warranty service afterwards.