FYB FY-6500MT conference controller
- Model
- FY-6500MT
- SKU
- FYB-440593
Controller for a wired and wireless conference system: zones for 16 rooms, separate outputs for per-speaker recording, 63+1-channel interpretation.
On order
Price on request
Send a request. A manager will name the price and the delivery time during working hours.
Key specifications
- Communication interfaces
- EXTENSION port: connect conference system expansion equipment; DANTE port: connect to the external device of DANTE protocol (Optional finction)
- Power supply
- 100-240VAC
- Frequency response
- 80 – 16KHz
- Interpretation channels
- 63+1 channels
Description
The FYB FY-6500MT is a conference controller for wired and wireless units, with 63+1-channel simultaneous interpretation, a 4.3" touch screen and a built-in DSP.
Zones and outputs
- One unit for 16 rooms: independent audio control by zone, and rooms can be merged.
- 16 separate outputs: the voice of each unit on a separate channel, for per-speaker recording and speech transcription systems.
- Interpretation channels sent to 16 outputs for recording or monitoring.
- Group output: built-in n × 16 audio matrix, any source to any output at any level ratio.
Audio and control
- Audio latency under 5 ms, uncompressed, 48 kHz; DSP with feedback suppression, EQ and delay.
- RCA and two Phoenix inputs; RCA, XLR and 16 Phoenix outputs.
- Up to 5300 wired and 300 wireless units, 8 wired and 6 wireless microphones live at once; 29 channels with interference avoidance.
- Control from PC software or a browser, RS232 central control; ring cable redundancy and a DANTE port as options.
100–240 V AC mains, 350 W, 30 W on standby. The system for a room is specified when audio and public address and conference systems are designed.
Specifications
| Capacity | wired microphone ≤ 5300; wireless microphone ≤ 300 |
|---|
| Communication interfaces | EXTENSION port: connect conference system expansion equipment; DANTE port: connect to the external device of DANTE protocol (Optional finction) |
|---|---|
| Ethernet | WIFI network port: connect to wireless AP; PC network port: connect to the computer |
| Display | 4.3 inches full-color touch screen |
|---|
| Power supply | 100-240VAC |
|---|---|
| Power consumption | 350 W |
| Standby power consumption | 30 W |
| Frequency response | 80 – 16KHz |
|---|---|
| Signal-to-noise ratio | >80 dB (A) |
| Total harmonic distortion | <0.05% |
| Connector | special cable |
| Dynamic range | >80 dB |
| Interpretation channels | 63+1 channels |
FAQ
What's the difference between digital and analog conference systems?
Analog systems use analog audio signal – low quality, noise, limited functionality, outdated technology. Digital systems use digital audio processing (DSP) – high quality (48kHz), automatic echo cancellation, noise filtering, speech recording, RFID identification, integration with other systems. Modern installations use only digital systems.
How many delegate units can be connected to one system?
Depends on central controller model. Budget controllers – 50-100 units (small board rooms). Standard controllers – 150-300 units (medium conferences). Professional controllers – 500+ units (large parliaments, international conferences). Units connect via Daisy Chain topology – each unit connects to next, last unit connects to controller.
Can digital conference system integrate with video conferencing?
Yes, digital conference systems integrate with video conferencing systems (Zoom, Teams, Webex) – central controller has audio output (Line Out, USB Audio) that connects to video codec or computer. This allows conducting hybrid conferences – physical participants use delegate units, remote participants join via Zoom/Teams. PTZ camera automatically tracks speaker.
Need it installed?
LAGI will deliver, install and set up the equipment and provide warranty service afterwards.