Skip to content
FYB

FYB FY-651AP Wi-Fi access point for wireless conference systems

Model
FY-651AP
SKU
FYB-440590

5 GHz Wi-Fi access point for the FYB wireless conference system: gigabit port, PoE power, and ceiling, wall or desk mounting.

On order

Price on request

Send a request. A manager will name the price and the delivery time during working hours.

Key specifications

Communication interfaces
1 RJ45 port
Power supply
12 V/2 A
Operating temperature
0 °C~45 °C
PoE
Support 802.3at/bt Power over Ethernet standard
All specifications

Description

The FYB FY-651AP is a Wi-Fi access point for a wireless conference system: the 5 GHz radio network for the participants’ wireless units. 802.11a/n/ac Wave 2, with a total rate of up to 1.601 Gbps.

  • MU-MIMO: data from several devices received at the same time.
  • 80 and 160 MHz channels for less congestion and lower latency.
  • WPA3 security, up to 32 networks (SSIDs) isolated from each other.
  • Gigabit RJ45 port (10/100/1000M) to the system network.
  • 12 V, 2 A adapter or PoE (802.3at/bt) over the same network cable; consumption under 15 W.
  • Built-in matrix antenna, transmit power up to 20 dBm in 1 dBm steps.

IP41 housing for indoor use, 0–45 °C, 10–90 % humidity. Ceiling, wall or desk mounting, with status on a blue indicator. The access point position in a room is chosen when audio and public address systems are designed.

Specifications

Communication
Communication interfaces1 RJ45 port
Ethernet1 10/100/1000M electrical port
Transmit powerTransmission power: ≤20 dBm; Adjustable power granularity: 1 dBm; Adjustable power range: 1 dBm ~ corresponding national regulations
Antennabuilt-in matrix smart antenna
Software and functions
Standard functionsReset/restore factory settings
Power
Power supply12 V/2 A
Power consumption<15 W
PoESupport 802.3at/bt Power over Ethernet standard
Physical and environment
Ingress protection (IP)IP41
Operating temperature0 °C~45 °C
Operating humidity10%~90%RH

FAQ

What's the difference between wireless and wired conference system?

Wired conference system – all delegate units connected by cable to central controller, advantages: stable connection, no battery required, infinite operation. Disadvantages: complex installation (cable routing), not mobile, expensive installation. Wireless conference system – delegate units connect via RF (2.4GHz/5.8GHz) technology, advantages: fast installation (no cables required), mobile (easy relocation), elegant (no cables on table). Disadvantages: requires battery charging (8-12 hours), possible RF interference (rare). Recommendation: wireless – modern choice (mobile, elegant), wired – for permanent installations.

How many delegate units can connect to one controller?

Depends on controller model and RF frequency range. Small systems – 10-20 delegate units (small meetings, boardrooms). Medium systems – 30-50 delegate units (conference halls, universities). Large systems – 100-250 delegate units (large conferences, parliaments). Technical limitation: RF frequency range – in 2.4GHz range can support 50-100 units (depends on RF interference), in 5.8GHz range can support 100-250 units (less interference). Recommendation: if need >100 units → use 5.8GHz system or multiple controllers.

Can wireless conference system integrate with video conferencing?

Yes, wireless conference systems integrate with video conferencing systems (Zoom, Microsoft Teams, Cisco Webex) – controller audio output (Line Out, XLR) → video conferencing system input (Mic In), video conferencing system output (Speaker Out) → controller input (Line In) → delegate unit speakers. This allows: local participants hear remote participants in delegate unit speakers, remote participants hear local participants, automatic audio mixing (all microphones into one signal). Can also integrate with audio recording systems – automatic protocol creation.

Need it installed?

LAGI will deliver, install and set up the equipment and provide warranty service afterwards.