FYB FY-6500M conference controller
- Model
- FY-6500M
- SKU
- FYB-440585
Central unit of a conference system with wired and wireless units connected at the same time: built-in DSP, 4.3" touch screen, control from a PC or browser.
On order
Price on request
Send a request. A manager will name the price and the delivery time during working hours.
Key specifications
- Communication interfaces
- EXTENSION port: connect conference system expansion equipment; Optional DANTE port: connected to external devices with DANTE protocol
- Power supply
- 100-240VAC
- Frequency response
- 80 – 16KHz
- Interpretation channels
- 63+1 channels
Description
The FYB FY-6500M is the economy version of a conference controller, for wired and wireless units in one system. Control from the 4.3" touch screen, PC software or a browser over TCP/IP.
Audio
- Digital ring network: uncompressed audio at 48 kHz with under 5 ms latency.
- Built-in DSP: audio matrix, feedback suppression, EQ, volume and delay.
- Inputs: 1 RCA and 2 Phoenix terminals; outputs: 1 RCA, 1 XLR and 16 Phoenix terminals, each with separate EQ and volume.
- 80 Hz – 16 kHz, signal-to-noise ratio above 80 dB, distortion under 0.05 %.
- Radio interference avoidance: automatic choice of 29 channels.
Capacity and connections
Up to 5300 wired and 300 wireless units, with up to 8 wired and 6 wireless microphones open at once. WIFI port to the wireless access point, PC port to a computer, EXTENSION port for expansion equipment; DANTE is optional. Over RS232, microphones can also be controlled from the room control system.
Options: 16 separate output channels for recording each participant and for speech transcription, ring cabling so a meeting continues if one cable is cut, and up to 16 rooms combined with zone control. 100–240 V AC supply, 350 W consumption, 30 W in standby. The system configuration for a room is set when audio and public address systems are designed.
Specifications
| Capacity | wired microphone ≤ 5300; wireless microphone ≤ 300 |
|---|
| Communication interfaces | EXTENSION port: connect conference system expansion equipment; Optional DANTE port: connected to external devices with DANTE protocol |
|---|---|
| Ethernet | WIFI network port: connect to wireless AP; PC network port: connect to the computer |
| Display | 4.3 inches full-color touch screen |
|---|
| Power supply | 100-240VAC |
|---|---|
| Power consumption | 350 W |
| Standby power consumption | 30 W |
| Frequency response | 80 – 16KHz |
|---|---|
| Signal-to-noise ratio | >80 dB (A) |
| Total harmonic distortion | <0.05% |
| Connector | special cable |
| Dynamic range | >80 dB |
| Interpretation channels | 63+1 channels |
FAQ
What's the difference between wireless and wired conference system?
Wired conference system – all delegate units connected by cable to central controller, advantages: stable connection, no battery required, infinite operation. Disadvantages: complex installation (cable routing), not mobile, expensive installation. Wireless conference system – delegate units connect via RF (2.4GHz/5.8GHz) technology, advantages: fast installation (no cables required), mobile (easy relocation), elegant (no cables on table). Disadvantages: requires battery charging (8-12 hours), possible RF interference (rare). Recommendation: wireless – modern choice (mobile, elegant), wired – for permanent installations.
How many delegate units can connect to one controller?
Depends on controller model and RF frequency range. Small systems – 10-20 delegate units (small meetings, boardrooms). Medium systems – 30-50 delegate units (conference halls, universities). Large systems – 100-250 delegate units (large conferences, parliaments). Technical limitation: RF frequency range – in 2.4GHz range can support 50-100 units (depends on RF interference), in 5.8GHz range can support 100-250 units (less interference). Recommendation: if need >100 units → use 5.8GHz system or multiple controllers.
Can wireless conference system integrate with video conferencing?
Yes, wireless conference systems integrate with video conferencing systems (Zoom, Microsoft Teams, Cisco Webex) – controller audio output (Line Out, XLR) → video conferencing system input (Mic In), video conferencing system output (Speaker Out) → controller input (Line In) → delegate unit speakers. This allows: local participants hear remote participants in delegate unit speakers, remote participants hear local participants, automatic audio mixing (all microphones into one signal). Can also integrate with audio recording systems – automatic protocol creation.
Need it installed?
LAGI will deliver, install and set up the equipment and provide warranty service afterwards.