FYB FIP-501C IP audio decoder
- Model
- FIP-501C
- SKU
- FYB-436824
Rack-mount network decoder: sound from the IP PA system goes to an external amplifier for halls, corridors and outdoor areas.
On order
Price on request
Send a request. A manager will name the price and the delivery time during working hours.
Key specifications
- Power supply
- AC220 V/50 Hz-60 Hz
- Frequency response
- ±2db (20 – 20 kHz)
- Dimensions
- 482 (width) * 180 (depth) * 44 (height) mm excluding machine feet
- Operating temperature
- 5 °C~40 °C
Description
The FYB FIP-501C is an IP audio decoder for the FYB 500 series cloud PA system, installed in the low-voltage equipment room of a building or zone. Network audio is turned into a line-level signal for an external power amplifier, which then covers halls, corridors and outdoor areas. This is how an ordinary PA amplifier is connected to an IP system.
- 775 mV line output, 470 Ω, RCA connectors.
- 20 Hz – 20 kHz (±2 dB), signal-to-noise ratio of at least 81 dB (86 dB weighted), distortion no more than 1 %.
- Mains power outlet with built-in power management.
- Audio mixing: an announcement plays over the music, which carries on at a lower level.
- Volume, rights and zone groups set from the platform, with decoder status reported back.
- Set-up by QR code from the app, factory reset button.
19" case, 44 mm high (482 × 180 × 44 mm), 2.5 kg, 220 V mains. Decoders and amplifiers are assigned to zones when audio and public address systems are designed.
Specifications
| Ethernet | 100 Mbps |
|---|---|
| Protocols | RTP/TCP/IP, UDP |
| Power supply | AC220 V/50 Hz-60 Hz |
|---|---|
| Electrical protection | AC FUSE*T10 A × 1 |
| Standby power consumption | <3 W |
| Power cord | (3 × 1.0 mm)*1.5M (standard) |
| Power connector | Three-position phoenix tail plug interface |
| Frequency response | ±2db (20 – 20 kHz) |
|---|---|
| Signal-to-noise ratio | Broadband signal-to-noise ratio: ≥81db; Weighted SNR: ≥86db |
| Total harmonic distortion | ≤1% |
| Sampling rate | 8K~48KHz |
| Audio bitrate | 8K~512 Kbps |
| Audio formats | MP3/MP4/MKV/FLC/WAV (play the original file, the sound quality reaches CD level) |
| Output level | 775mV, 4 lotus seat |
| Output impedance | 470Ω |
| Dimensions | 482 (width) * 180 (depth) * 44 (height) mm excluding machine feet |
|---|---|
| Net weight | 2.5 kg |
| Mounting | rack installation |
| Operating temperature | 5 °C~40 °C |
| Operating humidity | 20% to 80% relative humidity, no condensation |
Used in solutions
FAQ
What's the difference between Cloud PA system and traditional PA system?
Traditional PA systems work locally in one building, require central amplifier and audio cables to each speaker. Cloud PA system works on IP network and internet – each speaker is an IP device connected to cloud server. This allows managing multiple sites (branches in different cities) from single platform, adding new speakers without cables, and controlling from smartphone.
Can Cloud PA system integrate with other systems?
Yes, 500 Series Cloud PA system integrates with: SIP/VoIP telephony (call to any zone), fire alarm systems (automatic evacuation announcements), access control (intercom at doors), video surveillance (video intercom), BMS building management systems (centralized control). API integration is supported.
How secure is Cloud PA system?
500 Series Cloud PA system uses AES-256 encryption for audio streams, TLS/SSL protocol for communication, and two-factor authentication (2FA) on management platform. Data is stored on encrypted cloud servers. System supports VPN connection and local backup server (if internet goes down, system continues working on local network).
Need it installed?
LAGI will deliver, install and set up the equipment and provide warranty service afterwards.