Skip to content
FYB

FYB FIP-5070Z – FIP-52000Z 8-zone IP PA amplifier

Model
FYB-553839

8-zone IP PA amplifier with a 100 V output: network broadcasts plus local microphones, with power from 70 to 2000 W.

On order

Price on request

Send a request. A manager will name the price and the delivery time during working hours.

Key specifications

Power supply
AC220 V/50 Hz-60 Hz
Frequency response
50 Hz~16KHz (+1 dB, -3 dB)
Dimensions
482 (width)*380 (depth)*88 (height) mm excluding machine feet
Operating temperature
5 °C~40 °C
All specifications

Description

FYB FIP-5070Z – FIP-52000Z: a series of 8-zone IP PA amplifiers from 70 to 2000 W for the FYB 500 series cloud PA system. The amplifier goes in the equipment room: audio arrives over the network and is fed through the 100 V output to speakers in halls, corridors and outdoor areas. A 100 V line takes many speakers with transformers on one cable and can run a long way.

  • Local inputs: microphone inputs MIC1 and MIC2 (15 mV) and the AUX2 line input (775 mV).
  • MIC1 priority over the other channels, adjustable 0–30 dB.
  • Treble (10 kHz) and bass (100 Hz) ±10 dB.
  • 50 Hz – 16 kHz, signal-to-noise ratio 85 dB on AUX and 70 dB on MIC, 0.5 % distortion at 1 kHz.
  • Level, distortion, protection and overheating indicators.
  • 775 mV/470 Ω line output on two RCA connectors.

19" rack case, 482 × 380 × 88 mm, 220 V mains, operating temperature 5–40 °C. Amplifier power is worked out from the total of the speakers on the lines when audio and public address systems are designed.

Specifications

Hardware
Indicatorscan display output signal strength, distortion, protection, over-temperature status
Power
Power supplyAC220 V/50 Hz-60 Hz
Power cord(3 × 0.75 mm)*1.5M (standard)
Power connectorthree-position Phoenix tail plug interface
Audio
Outputs100 V
Frequency response50 Hz~16KHz (+1 dB, -3 dB)
Signal-to-noise ratioMIC1,2:70 dB; AUX1,2:85 dB
Total harmonic distortion0.5% at 1KHz, 1/3 Output power
Input sensitivityLAN input sensitivity: 30mV-1200mV (unbalanced); AUX2 input sensitivity: 775mV (unbalanced); MIC1 input sensitivity: 15mV (unbalanced); MIC2 input sensitivity: 15mV (unbalanced)
Output level775mV/470Ω, 2-way lotus seat output interface
EqualizerTreble boost, attenuation (10KHz): ±10 dB; Bass boost, attenuation (100Hz): ±10 dB
PriorityMIC1 takes priority over other channels; 0-30 dB adjustable
Physical and environment
Dimensions482 (width)*380 (depth)*88 (height) mm excluding machine feet
Mountingrack installation
Operating temperature5 °C~40 °C
Operating humidity20%~80% relative humidity, no condensation

FAQ

What's the difference between Cloud PA system and traditional PA system?

Traditional PA systems work locally in one building, require central amplifier and audio cables to each speaker. Cloud PA system works on IP network and internet – each speaker is an IP device connected to cloud server. This allows managing multiple sites (branches in different cities) from single platform, adding new speakers without cables, and controlling from smartphone.

Can Cloud PA system integrate with other systems?

Yes, 500 Series Cloud PA system integrates with: SIP/VoIP telephony (call to any zone), fire alarm systems (automatic evacuation announcements), access control (intercom at doors), video surveillance (video intercom), BMS building management systems (centralized control). API integration is supported.

How secure is Cloud PA system?

500 Series Cloud PA system uses AES-256 encryption for audio streams, TLS/SSL protocol for communication, and two-factor authentication (2FA) on management platform. Data is stored on encrypted cloud servers. System supports VPN connection and local backup server (if internet goes down, system continues working on local network).

Need it installed?

LAGI will deliver, install and set up the equipment and provide warranty service afterwards.